SlideShare una empresa de Scribd logo
1 de 127
Descargar para leer sin conexión
FLEXIBLE PAVEMENT
THEORY AND DESIGN
Guide : Dr. Shashikant Sharma,
Assistant prof. Civil engineering department.
NATIONAL INSTITUTE OF TECHNOLOGY, HAMIRPUR
DEPT. OF CIVIL ENGINEERING, 2016
THEORY OF
FLEXIBLE PAVEMENT :
26/10/20162
Presented by:
 Md. Taiyab Jawed (16M144)
 Pawan Kumar (16M145)
 Gyandeep Singh Arya (16M146)
What is pavement ?
 A structure consisting of superimposed layers of
processed materials above the natural soil sub-
grade, whose primary function is to distribute the
applied vehicle loads to the sub-grade.
26/10/20163
Types of Pavement
26/10/20164
PAVEMENT
FLEXIBLE PAVEMENT RIGID PAVEMENT
Flexible pavement:
26/10/20165
 Flexible pavements are those which on a whole have
low or negligible flexural strength and rather flexible
in their structural action under load.
Load transfer:
26/10/20166
 Load is transferred to the lower layer by grain to
grain distribution as shown in the figure given below;
Load Transfer (continue …)
26/10/20167
 The wheel load acting on the pavement will be
distributed to a wider area, and the stress decreases
with the depth. Flexible pavement layers reflect the
deformation of the lower layers on to the surface
layer
TYPICAL LAYERS OF A FLEXIBLE
PAVEMENT :
26/10/20168
 Typical layers of a conventional flexible pavement
includes seal coat, surface course, tack coat, binder
course, prime coat, base course, sub-base course,
compacted sub-grade, and natural sub-grade.
TYPICAL LAYERS OF A FLEXIBLE
PAVEMENT
26/10/20169
 Seal coat is a thin surface treatment used to water-
proof the surface and to provide skid resistance.
 Tack coat is a very light application of asphalt
emulsion diluted with water. And It provides bonding
between two layers of binder course.
 Prime coat is an application of low viscous cutback
bitumen to an absorbent surface like granular bases
on which binder layer is placed and provides
bonding between two layers.
TYPICAL LAYERS OF A FLEXIBLE
PAVEMENT (Continue ….)
26/10/201610
 Surface course is the layer directly in contact with
traffic loads and are constructed with dense graded
asphalt concrete.
 Binder course purpose is to distribute load to the
base course. Binder course requires lesser quality of
mix as compared to course above it.
 Base course provides additional load distribution
and contributes to the sub-surface drainage
TYPICAL LAYERS OF A FLEXIBLE
PAVEMENT (Continue ….)
26/10/201611
 Sub-base course the primary functions are to
provide structural support, improve drainage, and
reduce the intrusion of fines from the sub-grade in
the pavement structure
 Sub-grade The top soil or sub-grade is a layer of
natural soil prepared to receive the stresses from the
layers above
FACTORS AFFECTING PAVEMENT DESIGN
26/10/201612
 1. Design Wheel Load
 Max. Wheel load
 Axle configuration
 Contact pressure
 ESWL.
 Repetition of loads
 2. Climatic Factor
 3. Pavement component material
Design Wheel Load.
26/10/201613
 Max. Wheel load - It is used to determine the depth
of the pavement required to ensure that the
subgrade soil does not fail.
 Contact pressure - It determines the contact area and the
contact pressure between the wheel and the pavement
surface. For simplicity elliptical contact area is consider to
be circular.
Design Wheel Load (Continue)
26/10/201614
 Axle configuration - the axle configuration is important to
know the way in which the load is applied on the pavement
surface.
Design Wheel Load (Continue)
26/10/201615
 Equivalent single wheel load (ESWL)
Design Wheel Load (Continue)
26/10/201616
 Repetition of loads :
 Each load application causes some deformation and the
total deformation is the summation of all these.
 Although the pavement deformation due to single axle
load is very small, the cumulative effect of number of load
repetition is significant.
 Therefore, modern design is based on total number of
standard axle load (usually 80 KN single axle)
Climatic Factor
26/10/201617
 1. Temperature -
 Wide temperature variations may cause damaging
effects.
 Pavement becomes soft in hot weather and brittle in very
cold weather.
 2. Variation in moisture condition –
 It depends on type of the pavement, type of soil type,
ground water variation etc.
 It can be controlled by providing suitable surface and sub-
surface drainage.
Characteristic of Pavement material
26/10/201618
 1. California bearing ratio- It determines the strength
of soil sub-grade, sub-base or base and it is used for
the design of pavement.
 2. Elastic modulus -It measures the materials
resistance to being deformed elastically upon
application of the wheel load.
 3. Poisson Ratio – It is the ratio of lateral strain to the
axial strain caused by a load parallel axis along axial
strain.
 4. Resilient modulus- The elastic modulus based on
the recoverable strain under repeated loads is called
the resilient modulus MR =σd/σr .
Characteristic of Pavement material
(Continue ….)
26/10/201619
 The following material properties are consider for
both flexible and rigid pavements.
 When pavements are considered as linear elastic, the
elastic moduli and poisson ratio are specified.
 If the elastic modulus of a material varies with the time of
loading, then the resilient modulus is selected.
Design procedures for flexible pavements:
26/10/201620
Design Procedures
Empirical Design
Mechanistic-
Empirical Design
Mechanistic
Design
IRC:37-2012 is based on Mechanistic-Empirical
Design
Mechanistic-empirical design
26/10/201621
 1. It can be used for both existing pavement
rehabilitation and new pavement construction
 2. It can accommodate changing load types
 3. It uses material proportion that relates
better with actual pavement performance
 4. It provides more reliable performance
predictions
Failures of flexible pavements:
26/10/201622
 Different types of failure encountered in flexible
pavements are as follow.
 1. Alligator cracking or Map cracking (Fatigue)
 2. Consolidation of pavement layers (Rutting)
 3. Shear failure cracking
 4. Longitudinal cracking
 5. Frost heaving
 6. Lack of binding to the lower course
 7. Reflection cracking
 8. Formation of waves and corrugation
 9. Bleeding
 10. Pumping
1. ALLIGATOR OR MAP CRACKING
(FATIGUE CRACKING)
26/10/201623
 Followings are the primary causes of
this type of failure.
 Relative movement of pavement
layer material
 Repeated application of heavy
wheel loads
 Swelling or shrinkage of subgrade
or other layers due to moisture
variation
2. CONSOLIDATION OF PAVEMENT
LAYERS (RUTTING)
26/10/201624
 Formation of ruts falls in this
type of failure.
 A rut is a depression or
groove worn into a road by
the travel of wheels.
 This type of failure is caused
due to following reasons.
 •Repeated application of
load along the same
wheel path resulting
longitudinal ruts.
 •Wearing of the surface
course along the wheel
path resulting shallow
ruts.
3. SHEAR FAILURE CRACKING:
26/10/201625
 Shear failure causes
upheaval of pavement
material by forming a
fracture or cracking.
 Followings are the primary
causes of shear failure
cracking.
 •Excessive wheel loading
 •Low shearing resistance of
pavement mixture
4. LONGITUDINAL CRACKING:
26/10/201626
 This types of cracks extents to the
full thickness of pavement.
 The following are the primary
causes of longitudinal cracking.
 Differential volume changes in
subgrade soil
 Settlement of fill materials
 Sliding of side slopes
5. FROST HEAVING:
26/10/201627
 Frost heaving causes
upheaval of localized
portion of a pavement.
The extent of frost
heaving depends upon
the ground water table
and climatic condition.
6. LACK OF BINDING WITH LOWER LAYER
(POTHOLES & SLIPPAGE)
26/10/201628
 When there is lack of
binding between surface
course and underlying
layer, some portion of
surface course looses up
materials creating patches
and potholes.
 Slippage cracking is one
form of this type of failure.
 Lack of prime coat or tack
coat in between two layers
is the primary reason
behind this type of failure.
7. REFLECTION CRACKING:
26/10/201629
 This type of failure
occurs, when
bituminous surface
course is laid over the
existing cement
concrete pavement
with some cracks. This
crack is reflected in
the same pattern on
bituminous surface.
8. FORMATION OF WAVES &
CORRUGATION :
26/10/201630
 Transverse
undulations appear
at regular intervals
due to the unstable
surface course
caused by stop-and-
go traffic.
9. BLEEDING:
26/10/201631
 Excess bituminous
binder occurring on the
pavement surface
causes bleeding.
Bleeding causes a shiny,
glass-like, reflective
surface that may be
tacky to the touch.
Usually found in the
wheel paths.
10. PUMPING:
26/10/201632
 Seeping or ejection
of water and fines
from beneath the
pavement through
cracks is called
pumping
FAILURES OF FLEXIBLE PAVEMENTS
DESIGN CONSIDERATION:
26/10/201633
 The design of flexible pavement as per IRC is
based on two major failure that are, fatigue
cracking and rutting failure.
IRC METHOD OF DESIGN OF FLEXIBLE
PAVEMENTS (IRC: 37-2012)
26/10/201634
 1. IRC:37-1970
 based on California Bearing Ratio (CBR) of subgrade
 Traffic in terms of commercial vehicles (more than 3
tonnes laden weight)
 2. IRC:37-1984
 based on California Bearing Ratio (CBR) of subgrade
 Design traffic was considered in terms of cumulative
number of equivalent standard axle load of 80 kN in
millions of standard axles (msa)
 Design charts were provided for traffic up to 30 msa using
an empirical approach.
 .
Continue ….
26/10/201635
 3. IRC:37-2001
 based on Mechanistic-Empirical method
 Pavements were required to be designed for traffic as
high as 150 msa.
 The limiting rutting is recommended as 20 mm in 20 per
cent of the length for design traffic
 4. IRC:37-2012
 based on Mechanistic-Empirical method
 The limiting rutting is recommended as 20 mm in 20 per
cent of the length for design traffic up to 30 msa and 10
per cent of the length for the design traffic beyond
Guidelines for Design by IRC: 37: 2012
26/10/201636
 Design Traffic:
 The recommended method considers design traffic
in terms of the cumulative number of standard axles
(80 kN) to be carried by the pavement during the
design life.
 Only the number of commercial vehicles having
gross vehicle weight of 30 kN or more and their axle-
loading is considered for the purpose of design of
pavement.
 Assessment of the present day average traffic
should be based on seven-day-24-hour count made
in accordance with IRC: 9-1972 "Traffic Census on
Non-Urban Roads".
Traffic growth rate (r):
26/10/201637
 Estimated by Analyzing:
 The past trends of traffic growth,
 Change in demand of Traffic by factors like specific
development, Land use changes etc.
 If the data for the annual growth rate of commercial
vehicles is not available or if it is less than 5 per
cent, a growth rate of 5 per cent should be used
(IRC:SP:84-2009).
Design life (n)
26/10/201638
 The design life is defined in terms of the cumulative
number of standard axles in msa that can be carried
before a major strengthening, rehabilitation or
capacity augmentation of the pavement is
necessary.
 Depending upon road type, Design traffic is ranges
from 10 to 15 years.
Vehicle damage factor (VDF)
26/10/201639
 It is defined as equivalent number of standard axles
per commercial vehicle.
 The Vehicle Damage Factor (VDF) is a multiplier to
convert the number of commercial vehicles of
different axle loads and axle configuration into the
number of repetitions of standard axle load of
magnitude 80 kN.

Continue ….
26/10/201640
Example on VDF:
26/10/201641
Sample Size for Axle Load Survey:
26/10/201642
Lane distribution factor
26/10/201643
 Distribution of commercial traffic in each direction
and in each lane is required for determining the total
equivalent standard axle load applications to be
considered in the design.
 In the absence of adequate and conclusive data, the
following distribution may be assumed until more
reliable data on placement of commercial vehicles
on the carriageway lanes are available:
Lane distribution calculation:
26/10/201644
 1) Single-lane roads:
 2) Two-lane single carriageway roads:
 3) Four-lane single carriageway roads:
 4) Dual carriageway roads:
Computation of Design traffic:
26/10/201645
 The design traffic in terms of the cumulative number
of standard axles to be carried during the design life
of the road should be computed using the following
equation:
Sub-grade
26/10/201646
 Requirements of CBR: Sub grade is made up of in-
situ material, select soil or stabilized soil.
 Compacted to a minimum of 97% of laboratory dry
density achieved with heavy compaction.
 Minimum CBR of 8% for traffic > 450 CVPD
 CBR can also be determined from Dynamic Cone
Penetrometer (60º cone) by ..
 Log10 CBR = 2.465-1.12log10 N
 Where, N = mm/blow
Sub-grade (Continue…)
26/10/201647
 Where different types of soils are used in sub grade
minimum 6 to 8 average value for each type is required.
 90th percentile for high volume and 80th percentile for
other category of road is adopted as design CBR .
 Maximum permissible variation
 Where variation is more average CBR should be average
of 6 samples and not three.
Effective CBR
26/10/201648
 Where there is significant difference between the
CBRs of the select sub grade and embankment
soils, the design should be based on effective CBR.
The effective CBR of the subgrade can be
determined from Fig.
Lab procedure for CBR calculation:
26/10/201649
 The test must always be performed on remoulded
samples of soils in the laboratory.
 The pavement thickness should be based on 4-day
soaked CBR value of the soil, remoulded at
placement density and moisture content ascertained
from the compaction curve.
 In areas with rainfall less than 1000 mm, four day
soaking is too severe a condition for well protected
sub-grade with thick bituminous layer and the
strength of the sub-grade soil may be
underestimated.
Continue ….
26/10/201650
 If data is available for moisture variation in the
existing in-service pavements of a region in different
seasons, molding moisture content for the CBR test
can be based on field data.
 Wherever possible the test specimens should be
prepared by static compaction. Alternatively dynamic
compaction may also be used.
Resilient Modulus:
26/10/201651
 Resilient modulus is the measure of its elastic
behavior determined from recoverable deformation
in the laboratory tests.
 The modulus is an important parameter for design
and the performance of a pavement.
 The relation between resilient modulus and the
effective CBR is given as:
Continue ….
26/10/201652
 The CBR of the sub-grade should be determined as
per IS: 2720 (Part 16) (36) at the most critical
moisture conditions likely to occur at site.
Principle of pavement design:
26/10/201653
 Pavement Model:
 Modeled as linear elastic
multilayer structure.
 Stress Analysis is based on
IITPave software
 Critical parameters for
analysis are
 1. Tensile strain at the bottom
of bituminous layer
 2. Vertical sub-grade strain at
the top of sub-grade.
 Failure of pavement is
considered due to cracking
and rutting
Check for Fatigue:
26/10/201654
 Micro cracks at the bottom of bituminous layer are
developed with every load repetition
 These cracks goes on expending till they propagate
to the surface due to the large load repetition
 In these guidelines, cracking in 20 per cent area has
been considered for traffic up to 30 msa and 10 per
cent for traffic beyond that.
Check for Fatigue (Continue….)
26/10/201655
 Two fatigue equations developed based on
performance data collected during various study are
 Nf= 2.21 * 10-04x [1/εt]3.89* [1/MR]0.854 (80 %
reliability)…(a)
 Nf= 0.711 * 10-04x [1/εt]3.89* [1/MR]0.854 (90 %
reliability)...(b)
 Where,
 Nf= fatigue life in number of standard axles,
 εt= Maximum Tensile strain at the bottom of the
bituminous layer, and
 MR= resilient modulus of the bituminous layer.
 Equation for 90% reliability implies that only 10% of
the pavement area will have more than 20% cracks.
Check for Fatigue (Continue….)
26/10/201656
 To consider the effect of volume of the bitumen and air
voids equation (b) is modified as follows
 Nf =0.5161 * C * 10-04 x [1/ εt]3.89 * [1/MR]0.854………(c)
 Va= per cent volume of air void and Vb= per cent volume
of bitumen in a given volume of bituminous mix.
 Nf= fatigue life, єt= maximum tensile strain at the bottom
of DBM.
 MR= Resilient modulus of bituminous mix.
 For traffic < 30 msa consider equation (a); For traffic >
30msa equation (c) is recommened.
Check for Rutting:
26/10/201657
 Rutting is the permanent deformation in pavement
usually occurring longitudinally along the wheel path.
 Causes –
 1. Deformation in sub grade /non-bituminous layer
 2. Secondary compaction and shear deformation of
bituminous layer
 Limiting value
 20 mm in 20% length for upto 30 msa
 20 mm in 10% length for > 30 msa
 Rutting affects the serviceability of pavement.
Rutting (Continue …)
26/10/201658
 Based on various studies the two equation develops
are;
 N = 4.1656 x 10-08[1/εv]4.5337 (80 per cent reliability)
 N = 1.41x 10-8x [1/εv]4.5337 (90 per cent reliability)
 Where,
 N = Number of cumulative standard axles, and
 εv= Vertical strain in the sub-grade
Pavement composition as per IRC:
26/10/201659
 A flexible pavement covered in these guidelines
consists of different layers as shown in figure;
SUB-BASE LAYER
26/10/201660
 UNBOUND SUB-BASE LAYER
 Sub-base materials may consist of natural sand,
moorum, gravel, laterite, kankar, brick metal,
crushed stone, crushed slag
 Sub-base materials passing 425 micron sieve when
tested in accordance with IS:2720 (Part 5) should
have liquid limit and plasticity index of not more than
25 and 6 respectively.
SUB-BASE LAYER(Unbound SB Continue…)
26/10/201661
 When coarse graded sub-base is used as a drainage
layer, Los Angeles abrasion < 40
 Required permeability; fines passing 0.075 mm
should be less than 2 per cent.
 Sub-base is constructed in two layers, the lower
layer forms the separation/filter layer to prevent
intrusion of subgrade soil into the pavement and the
upper GSB forms the drainage layer to drain away
any water
 Resilient modulus (MR) for granular sub-base
 MRgsb = 0.2 h0.45 * MR subgrade
 Where, h = thickness of sub-base layer in mm
SUB-BASE LAYER
26/10/201662
 Bound Sub base
 Material for bound sub-base may consist of soil,
aggregate or soil aggregate mixture modified with
chemical stabilizers such as cement, lime-flyash.
 The drainage layer of the sub-base may consist of
coarse graded aggregates bound with about 2 per
cent cement while retaining the permeability.
 Drainage and separation layers are essential when
water is likely to enter into pavements from the
shoulder, median or through the cracks in surface
layer.
SUB-BASE LAYER(Unbound SB Continue…)
26/10/201663
 Strength Parameter:
 Elastic Modulus E of bound sub-bases is
 Ecgsb = 1000 * UCS
 Where UCS = 28 day strength of the
cementitious granular material
BASE LAYER
26/10/201664
 UNBOUND BASE LAYER
 Base layer may consist of wet mix macadam, water
bound macadam, crusher run macadam, reclaimed
concrete etc.
 Resilient modulus of the granular base is given as..
 MR granular = 0.2 * h0.45 MR subgrade
 Where h = thickness of granular sub-base and base,
mm
 Poisson's ratio of granular bases and sub-bases
is recommended as 0.35.
BASE LAYER(Continue..)
26/10/201665
 CEMENTITIOUS BASES :
 Cemented base layers may consist of aggregates or
soils or both stabilized with chemical stabilizers, to
give a minimum strength of 4.5 to 7 MPa in 7/28
days.
 Default values of modulus of rupture are
recommended for cementitious bases (MEPDG).
 Cementitious stabilized aggregates - 1.40 MPa
 Lime—flyash-soil - 1.05 MPa
 Soil cement - 0.70 MPa
 Poisson's ration of the cemented layers may be
taken as 0.25.
Criteria for selecting Bitumen grade.
26/10/201666
 The recommended resilient modulus values of the
bituminous materials with different binders are:
Continue …..
26/10/201667
 The Poisson’s ratio of bituminous layer depends upon the
pavement temperature and a value of 0.35 is
recommended for temperature up to 35°C and value of
0.50 for higher temperatures.
 Higher viscosity of bituminous binders, which can be
achieved either by using higher viscosity grade bitumen
or modified bitumen will improve both fatigue and rutting
behavior of mixes as compared to mixes with normal
bitumen.
 Fatigue equation at any pavement temperature from
20°C to 40°C can be evaluated by substituting the
appropriate value of the resilient modulus of the
bituminous mix, air void and volume of bitumen.
Catalogue of designs has been worked out for a
temperature of 35°C.
Drainage Layer
26/10/201668
 Improvement of drainage can significantly reduce the
magnitude of seasonal heave. The desirable
requirements are:
 (a). Provision must be made for the lateral drainage of the
pavement structural section. The granular sub-base/base
should accordingly be extended across the shoulders
 (b). No standing water should be allowed on either side of
the road embankment.
 (c). A minimum height of1 m between the subgrade level
and the highest water level
Drainage Layer(Continue…)
26/10/201669
 Some typical drainage system is illustrated in
following Figs….
 Fig.1 Pavement along a Slope
Drainage Layer(Continue…)
26/10/201670
 Fig. 2 Pavement with Filter and Drainage Layers
Drainage Layer(Continue…)
26/10/201671
 Criteria to be satisfied:
 The filter/separation layer should satisfy the following
criteria:
 To prevent entry of soil particles into the drainage layer:
 D85 means the size of sieve that allows 85 per cent by
weight of the material to pass through it.
 Similar is the meaning of D50 and D15.
DESIGN OF
FLEXIBLE PAVEMENT :
26/10/201672
Presented by:
 Aditya Upadhya (16M150)
 Aniruddha Chopadekar (16M151)
 Samarth Bhatia (16M152)
What is design ?
26/10/201673
 Design of pavement includes deciding
the number of layers, its composition and
thickness for selected material, to
support traffic load safely without failure.
Various cases in design.
26/10/201674
 The flexible pavement with different combinations of
traffic loads and material properties.
 1) Granular base and Granular sub-base.
 2) Cementitious base and sub-base with agg.
Interlayer.
 3) Cementitious base and sub-base with SAMI.
 4) RAP agg. Over cemented sub-base
 5) Cemented base and Granular sub-base
Problem statement.
26/10/201675
 Design the pavement for construction of a
new flexible pavement with the following data:
 Four lanes divided National Highway.
 Design life is 15 years.
Data collection
26/10/201676
 Material properties :
 California Bearing Ratio (CBR)
 Resilient Modulus (MR)
 Modulus of Elasticity (E)
 Poisson’s ratio (µ)
Material properties
26/10/201677
 CBR : The CBR values are calculated after
every kilometre on selected stretch of 10 km
having the same type of soil. Suppose the
values obtained are: 3.8, 2.8, 4.5, 3.9, 4.2, 2.9,
4.7, 4.3, 4.0 and 4.6%. Based on the
collected data the design CBR (90th percentile
CBR) is calculated as below:
Solution :
26/10/201678
 Arrange in ascending order : 2.8, 2.9, 3.8, 3.9, 4.0,
4.2, 4.3, 4.5, 4.6 and 4.7.
 Calculate the percentage greater than equal of the
value as follows:
 For CBR of 3.8, percentage of values greater than
equal to 3.8 = (8/10) x100 = 80%
 Similarly for 2.8 % is 100%, 4.5% CBR is 80% and
so on.
 Now a plot is made between Percentages of values
greater than equal to the CBR values versus the
CBR as follows.
Continue …
26/10/201679
RESULT : The 90th Percentile CBR value is 2.90%
Effective CBR:
26/10/201680
 (Figure 5.1, Page 11, IRC: 37: 2012)
Poisson’s ratio
26/10/201681
 Poisson’s ratio µ is define as the ratio of lateral strain
(ɛl) to the axial strain (ɛa), caused by load parallel to
the axis along which ɛa is measured.
 It is found that for most of the pavement structures,
the influence of µ value is normally small.
 For most of cement treated materials (soil cement,
cement treated base, lean concrete and PCC), the
value of µ normally lies between 0.10 and 0.25.
 Unbound granular material lie between 0.2 and 0.5
and those for bituminous mixes range from 0.35 to
0.50
Elastic modulus
26/10/201682
 Elastic moduli of various pavement materials
are obtained either through tests or through
the recommendations available in the
guidelines.
 Repeated flexure or indirect tensile tests are
carried out to determine the dynamic modulus
Ed of bituminous mixes.
Resilient modulus
26/10/201683
 Resilient modulus is the measure of its elastic
behaviour determined from recoverable deformation
in the laboratory tests.
 The behaviour of the subgrade is essentially elastic
under the transient traffic loading with negligible
permanent deformation in a single pass.
 This can be determined in the laboratory by
conducting tests.
Calculation of MR for Sub-grade.
26/10/201684
 The resilient modulus is calculated as follow;
 MR (Mpa) = 10 x CBR …………. For CBR 5
= 17.6 x CBR0.64 ………For CBR > 5
 (From equation 5.2, Page no. 12, IRC: 37: 2012)
Calculation of MR for Granular base and
sub-base.
26/10/201685
 The resilient modulus is calculated as follow;
 MRgsb = 0.20 x h0.45 x MR subgrade
 h = Thickness of sub-base layer in mm, …… sub-
base,
 = Cumulative thickness of Base layer and Sub-
base layer in mm ... for base
Traffic count
26/10/201686
 Assessment of average daily traffic should be normally
based on 7 day-24hr count made in accordance with
IRC: 9 “Traffic census on non-urban roads”.
 Classify traffic into different categories such as two
wheelers, three wheelers, passenger cars, trucks etc.
 But only commercial vehicle with laden weight > 3 tonne
is taken into consideration of design.
 Commercial vehicles are further categorised as single
axle single wheel, single axel dual wheel, Tandem axle
dual wheel and Tridem axle dual wheel.
 Where no traffic count data is available, data from roads
of similar classification and importance may be used to
predict the design traffic
Calculation of Design factor
26/10/201687
 1) Design Traffic,
 2) Axle load survey,
 3) Vehicle Damage Factor
 4) Lane Distribution Factor
Design Traffic:
26/10/201688
 Initial traffic after construction in terms of number of
Commercial Vehicles per day (CVPD).
 Traffic growth rate during the design life in
percentage.
 Design life in number of years.
 Spectrum of axle loads.
 Vehicle Damage Factor (VDF).
 Distribution of commercial traffic over the
carriageway.
Calculation of Design traffic:
26/10/201689
 For our case the number of heavy commercial vehicle
per day is taken as 7 day average for 24 hour count
comes to be 2792 vehicle per day as per the last count.
 i. e. P = 2792 cvpd, r = 7 %, and x = 10 years
 A = 2792 (1+0.07)10 = 5000 cvpd.
 RESULT: Traffic in the year of completion of construction
is 5000 cvpd in both the directions.
Axle load survey :
26/10/201690
 Required for VDF calculation and Fatigue damage
analysis of cementitious base.
 The axle load spectrum is formulated by considering
10 kN, 20 kN and 30 kN intervals for single, tandem
and tridem axle respectively.
 RESULT: As per study the percentage of Single,
Tandom and Tridom axle are 45%, 45% and 10%
respectively
Axle load spectrum
26/10/201691
Single Axle Load Tandem Axle Load Tridem Axle Load
Axle load Class
(KN)
Percentage of
Axles
Axle load Class
(KN)
Percentage of
Axles
Axle load Class
(KN)
Percentage of
Axles
185-195 0.64 390-410 1.85 585-615 1.40
175-185 0.80 370-390 2.03 555-585 1.60
165-175 0.80 350-370 2.03 525-555 1.60
155-165 2.58 330-350 2.08 495-525 1.80
145-155 2.58 310-330 2.08 465-495 1.80
135-145 5.80 290-310 4.17 435-465 4.40
125-135 5.80 270-290 4.17 405-435 4.40
115-125 11.82 250-270 12.67 375-405 13.10
105-115 11.82 230-250 12.67 345-375 13.10
95-105 12.90 210-230 10.45 315-345 10.90
85-95 12.16 190-210 10.45 285-315 10.40
< 85 32.30 170-190 7.05 255-285 7.15
<170 28.28 <255 28.33
Total 100 100 100
Vehicle damage factor
26/10/201692
 The formula to calculate VDF is given as follows:
 W1, W2, ….. are the mean values of the various axle load
groups.
 V1, V2, …. are the respective traffic volumes.
 Ws is the standard axle load.
 Standard axle load for Single axle, Tandem axle and
Tridem axle is 80 KN, 148 KN and 224 KN as per
IRC: 37:2012 (Page 7)
 RESULT: The VDF for Single axle load, Tandem axle
load and Tridem axle load is 4.11, 8.37 and 7.51.
Vehicle Damage factor (Continue.)
26/10/201693
 Were sufficient information on axle loads are not
available or the small size of project does not
warrant an axle load survey the default values of
VDF may be adopted as given in the table given
below.
Lane distribution factor.
26/10/201694
 Distribution of commercial traffic in each direction
and in each lane is required for determining the total
equivalent standard axle load applications to be
considered in the design.
 Single lane road : Total vehicle in both direction.
 Two lane single carriage way : 50% of total vehicle in
both direction.
 Four lane single carriage way : 40% of total vehicle
in both direction.
 Dual carriage way: Two lane 75%, Three lane 60%,
Four lane 45% of number of CV in each direction.
Lane distribution factor (Continue….)
26/10/201695
 RESULT: In the present design problem we are
given to design a four lane divided highway,
therefore the Lane distribution factor is 75 percent of
number of commercial vehicle in each direction.
Million standard axle
26/10/201696
 The design traffic is calculated in terms of cumulative
number of standard axle of 80 kN carried during the
design life of the road.
 r = 7.5 %,
 n = 20 yr. ( Expressway and Urban roads), 15 yr (NH
and SH), In this problem we have to design National
highway take n as 15 years,
 A is 5000cvpd in both direction and 2500 in one
direction
Calculation of Million std. axle.
26/10/201697
 Single axle load (N1): 45 percent vehicles are of single
axle.
A : 0.45 x 2500 = 1125, F : 4.11
N1 = 33.06 x 106 = 33.06 msa
 Tandem axle load (N2): 45 percent vehicles are of
tandem axle.
A : 0.45 x 2500 = 1125, F : 8. 37
N2 = 67.33 x 106 = 67.33 msa
 Tridem axle load (N3): 10 percent vehicles are of tridem
axle.
A : 0.10 x 2500 = 250, F : 7.51
Calculation of Million std. axle. (Continue…)
26/10/201698
 Total msa (N1+N2+N3)
 = 33.06 + 67.33 + 13.42
= 113.81 ̴ 150 msa (Aprox.)
 RESULT: The cumulative million standard axles to
be consider for design is 150 msa.
Determination pavement thickness
26/10/201699
 Case 1 : Bituminous pavement with untreated
granular layer
Determination of thickness for Case 1
26/10/2016100
 The thickness of various layers is determined with
the help pavement design catalogue given in IRC:
37: 2012 from page 26 to 28, for various values of
effective CBR.
Determination of thickness for Case 1
(Continue ….)
26/10/2016101
 RESULT:
 For design traffic of 150msa and CBR of 7%
 Thickness of subbase (GSB) is 230 mm,
 Thickness of base (G. Base) is 250 mm,
 Thickness of Dense Bitumen macadam (DBM) is 140
mm,
 Thickness of Bituminous concrete (BC) is 50 mm
Case 2 : Bituminous pavement with
cemented base and cemented sub-base
with aggregate inter layer of 100mm
26/10/2016102
Continue ….
26/10/2016103
Determination of thickness for case 2.
26/10/2016104
 RESULT:
 For design traffic of 150msa and CBR of 7%
 Thickness of Cementitious sub-base (CT Subbase)
is 250 mm,
 Thickness of Cementitious base (CT Base) is 120
mm, Aggregate interlayer is 100mm
 Thickness of Dense Bitumen macadam (DBM) is 50
mm
 Thickness of Bituminous concrete (BC) is 50 mm are
 Obtained by interpolating the thickness of CBR 5%
and 10%.
Calculation of Resilient Modulus (MR) for
case 2
26/10/2016105
 MR subgrade = 17.6 x CBR0.64 = 17.6 x 70.64 = 61.15
Mpa.
 MR Bituminous layer = 3000 Mpa (From table 7.1
Resilienent Modulus of Bituminous Mixes, page 23,
IRC: 37: 2012)
 Pavement composition for 90 per cent Reliability is
BC + DBM = 100 mm,
 Aggregate interlayer = 100 mm (MR = 450 MPa),
 Cemented base = 120 mm (E = 5000 MPa),
 Cemented subbase = 250 mm (E = 600 Mpa)
Case 3 : Bituminous pavement with
cemented base and cemented sub-base with
SAMI layer over cemented base.
26/10/2016106
Continue ….
26/10/2016107
PAGE 33 AND 34 OF IRC: 37: 2012
Determination of thickness for Case 3
26/10/2016108
RESULT:
 Design traffic of 150 msa and CBR of 7%
 thickness of Cementitious sub-base (CT Subbase) is
250 mm,
 Thickness of Cementitious base (CT Base) is 165
mm,
 Thickness of Dense Bitumen macadam (DBM) is 50
mm
 Thickness of Bituminous concrete (BC) is 50 mm
are
 obtained by interpolating the thickness of CBR 5%
and 10%.
Case 4 Bituminous pavement with base of
fresh aggregate or RAP treated with foamed
bitumen/ Bitumen emulsion and cemented
sub-base
26/10/2016109
Continue …
26/10/2016110
PAGE 36 AND 37 OF IRC: 37: 2012
Determination of thickness for case 4
26/10/2016111
 RESULT:
 Design traffic of 150 msa and CBR of 7%
 Thickness of Cementitious sub-base (CT Subbase) is
250 mm,
 Thickness of Treater reclaimed aspalt pavement (Treated
RAP) is 180 mm,
 Thickness of Dense Bitumen macadam (DBM) is 50 mm
 Thickness of Bituminous concrete (BC) is 50 mm are
 Obtained by interpolating the thickness of CBR 5% and
10%.
 Instead of RAP base of fresh aggregates treated with
bitumen emulsion/ foamed bitumen can be used to obtain
stronger base.
Case 5 : Bituminous pavement with
cemented base and granular sub-base with
100mm WMM layer over cemented base:
26/10/2016112
Continue …
26/10/2016113
Determination of thickness for case 5
26/10/2016114
 RESULT:
 Design traffic of 150 msa and CBR of 7%
 Thickness of Granulated Subbase (GSB) is 250 mm
 Cementitious sub-base (CT Subbase) is 195 mm,
 Thickness of aggregate layer is 100 mm, Thickness
of Dense Bitumen macadam (DBM) is 50 mm
 Thickness of Bituminous concrete (BC) is 50 mm
 Obtain by interpolating the thickness of CBR 5% and
10%.
 The upper 100 mm of granular sub-base should be
open graded so that its permeability is about 300
mm/day or higher for quick removal of water entering
from surface.
Calculation of Resilient Modulus (MR) and
Modulus of Elasticity (E):
26/10/2016115
 For traffic of 150 msa, Subgrade CBR 7%,
 MR subgrade = 17.6 x CBR0.64 = 17.6 x 70.64 = 61.15
Mpa.
 MR Bituminous layer = 3000 Mpa (From table 7.1
Resilienent Modulus of Bituminous Mixes, page 23,
IRC: 37: 2012)
 MR Aggregate = 450 Mpa and
 E of cemented base is 5000 MPa,
 E Granular subbase = MR subgrade x 0.20 x h0.45
 Where, h = Thickness of GSB = 250 mm
 = 61.15 x 0.20 x 2500.45 = 146.72 Mpa.
Design check
26/10/2016116
 To check the suitability of pavement design
discussed above we carry out checks, which ensure
safety against the failure of designed pavement.
 The flexible pavement is checked for two types of
failures i.e. Rutting in pavement and Fatigue in
bottom layer of bituminous surfacing.
 The following condition should be satisfied for the
design to be satisfactory
 Design strain < Allowable strain
 Allowable strain = Obtained by fatigue model and
rutting model
 Design strain = IITpave software
Design of Drainage layer
26/10/2016117
 Design a granular drainage layer for a four lane
heavy duty divided highway for an annual
precipitation of 1200 mm. Longitudinal slope = 3 per
cent, Camber = 2.5 percent.
 Crack Infiltration Method
Continue ...
 Depth of drainage layer = 450 mm (WMM 250mm
and Sub-base 200mm) By design.
 Width of drainage layer : Calculate
 AB = 8.5+1+2x0.45 = 10.4 m (1m unpave shoulder)
 AC = 10.4 x(3/2) = 12.48 m.
 AD = 16.24 m
 (hypotenious of AB and AC)
 Elevation drop :
 Along AC: 12.48x3% = 0.374m
 Along CD: 10.40x2.5% = 0.26m
 Total drop = 0.634
26/10/2016118
Continue ….
 Hydraulic gradient = [Elevation drop/ length AD]
 = [0.634/16.24] =0.039
 Infiltration rate calculation:
 qi = Ic [Nc/Wp + Wc / (Wp.Cs)]
 Ic = 0.223 cub. m/day/meter
 Nc = 3
 Wp = 10.4 m
 Wc = Wp,
 Cs = 12 m
 q = 0.083 Cub.meter/day/meter
26/10/2016119
Continue.
 Amount of water infiltrated (Q);
 Q = 0.083 x 1 x 16.24 = 1.35 Cub.meter/ day.
 Compare with
 Q = KIA
 A = Area of cress section = 1 x 0.1 = 0.1 sq.m
 K = Coeff of permeability (Unknown)
 I = Hydraulic gradient (0.039)
 1.35 = K x 0.039 x 0.1
 K = 346.62 m/day
 This value of K is useful for deciding gradation.
26/10/2016120
(Decide grade by using table)
% Passing
Sieve
Opening,
Mm
Grading 1 Grading 2 Grading 3 Grading 4 Grading 5 Grading 6
20 100 100 100 100 100 100
12.5 85 84 83 81.5 79.5 75
9.5 77.5 76 74 72.5 69.5 63
4.76 58.3 56 52.5 49 43.5 32
2.36 42.5 39 34 29.5 22 5.8
2.00 39 35 30 25 17 0
0.84 26.5 22 15.5 9.8 0 0
0.42 18.2 13.3 6.3 0 0 0
0.25 13.0 7.5 0 0 0 0
0.10 6 0 0 0 0 0
0.075 0 0 0 0 0 0
Coeff. Of
permeability
m/day
3 35 100 350 850 950
26/10/2016121
Provide Grading 4 for K 346.62 m/day = 350m/day
Recommendation
26/10/2016122
 Specifications should be modified according to local
condition. In wet climate wearing course should be
impermeable.
 long duration and low intensity rainfall causes more
damage as compare with rainfall of small duration
and more density.
 If DBM and SDBC/BC are designed properly (4% air
voids and protected shoulder) impermeably can be
ensure.
 Adequate provision for sub-surface drainage prevent
pavement damage.
Recommendations.
 Thickness charts with BC/ SDBC are valid for all
rainfall area.
 For pavement carrying heavy traffic wearing course
laid over WBM shows better performance.
 For low traffic (upto 5 msa) bitumen surfacing with
two coats is found to be suitable.
26/10/2016123
Conclusion
26/10/2016124
 Time to time revisions of code provision are needed
keeping in view changes in traffic pattern and
development of new technologies. Further with the
gain of experience in the design as well as
construction procedure of flexible pavement have
demanded certain changes.
 Hence by considering the above factors IRC: 37:
2012 includes some conceptual changes in the
design of flexible pavement such as inclusion of
Resilience moduli and consideration of strain in
design.
Conclusion .
26/10/2016125
 This code also encourages the use IIT pave software
which is newly recommended.
 Since the use of semi-mechanistic approach, the
design is not only based on the experience but it
also gives parameters (strain parameter) to check
the obtained design.
 Solution to the above pavement design problem
shows that the thickness design varies with the
variation in various factors.
References
26/10/2016126
 [1] IRC: 37: 2012, “Guidelines for Design of Flexible
pavement”, second revision.
 [2] IRC: 37: 2001, “Tentative guidelines for Design of
Flexible pavement”
Thank you .
26/10/2016127

Más contenido relacionado

La actualidad más candente

Failures in flexible pavement
Failures in flexible pavementFailures in flexible pavement
Failures in flexible pavementRandhir Kumar
 
Types of failure in rigid pavements
Types of failure in rigid pavementsTypes of failure in rigid pavements
Types of failure in rigid pavementsAglaia Connect
 
Highway construction PPT
Highway construction PPTHighway construction PPT
Highway construction PPTVikas Sukhwal
 
Study of design of the flexible pavements
Study of design of the flexible pavementsStudy of design of the flexible pavements
Study of design of the flexible pavementsShaik Asif Ahmed
 
Flexible and-rigid-pavements
Flexible and-rigid-pavementsFlexible and-rigid-pavements
Flexible and-rigid-pavementsHARITSEHRAWAT
 
Irc method of design of flexible pavement 1
Irc method of design of flexible pavement 1Irc method of design of flexible pavement 1
Irc method of design of flexible pavement 1GARRE RAVI KUMAR
 
Bituminous road construction
Bituminous road constructionBituminous road construction
Bituminous road constructionAnitha Jacob
 
HIGHWAY CONSTRUCTION MATERIAL & PRACTICE
HIGHWAY  CONSTRUCTION  MATERIAL  &  PRACTICEHIGHWAY  CONSTRUCTION  MATERIAL  &  PRACTICE
HIGHWAY CONSTRUCTION MATERIAL & PRACTICEFresher Thinking
 
Road Construction
Road ConstructionRoad Construction
Road ConstructionDanish Mohd
 
ppt on construction and design of flexible pavement
ppt on construction and design of flexible pavementppt on construction and design of flexible pavement
ppt on construction and design of flexible pavementSUSMITAMAITY4
 
Soil stabilisation (1)
Soil stabilisation (1)Soil stabilisation (1)
Soil stabilisation (1)Safiullah Khan
 
Determining equivalent single wheel load.(ESWL)
Determining equivalent single wheel load.(ESWL) Determining equivalent single wheel load.(ESWL)
Determining equivalent single wheel load.(ESWL) Imran Nawaz
 
highway maintenance and evaluation
highway maintenance and evaluation highway maintenance and evaluation
highway maintenance and evaluation Senthamizhan M
 
Marshall Mix Design
Marshall Mix Design Marshall Mix Design
Marshall Mix Design Akhil Ahuja
 

La actualidad más candente (20)

Failures in flexible pavement
Failures in flexible pavementFailures in flexible pavement
Failures in flexible pavement
 
Highway Materials Unit-III
Highway Materials  Unit-IIIHighway Materials  Unit-III
Highway Materials Unit-III
 
Types of failure in rigid pavements
Types of failure in rigid pavementsTypes of failure in rigid pavements
Types of failure in rigid pavements
 
Highway construction PPT
Highway construction PPTHighway construction PPT
Highway construction PPT
 
Embankment
EmbankmentEmbankment
Embankment
 
Study of design of the flexible pavements
Study of design of the flexible pavementsStudy of design of the flexible pavements
Study of design of the flexible pavements
 
Flexible and-rigid-pavements
Flexible and-rigid-pavementsFlexible and-rigid-pavements
Flexible and-rigid-pavements
 
Cbr test
Cbr testCbr test
Cbr test
 
Burmister 2 layer
Burmister 2 layerBurmister 2 layer
Burmister 2 layer
 
Irc method of design of flexible pavement 1
Irc method of design of flexible pavement 1Irc method of design of flexible pavement 1
Irc method of design of flexible pavement 1
 
Bituminous road construction
Bituminous road constructionBituminous road construction
Bituminous road construction
 
HIGHWAY CONSTRUCTION MATERIAL & PRACTICE
HIGHWAY  CONSTRUCTION  MATERIAL  &  PRACTICEHIGHWAY  CONSTRUCTION  MATERIAL  &  PRACTICE
HIGHWAY CONSTRUCTION MATERIAL & PRACTICE
 
Road Construction
Road ConstructionRoad Construction
Road Construction
 
road construction
road constructionroad construction
road construction
 
ppt on construction and design of flexible pavement
ppt on construction and design of flexible pavementppt on construction and design of flexible pavement
ppt on construction and design of flexible pavement
 
Soil stabilisation (1)
Soil stabilisation (1)Soil stabilisation (1)
Soil stabilisation (1)
 
Determining equivalent single wheel load.(ESWL)
Determining equivalent single wheel load.(ESWL) Determining equivalent single wheel load.(ESWL)
Determining equivalent single wheel load.(ESWL)
 
highway maintenance and evaluation
highway maintenance and evaluation highway maintenance and evaluation
highway maintenance and evaluation
 
Flexible Pavement Design
Flexible Pavement DesignFlexible Pavement Design
Flexible Pavement Design
 
Marshall Mix Design
Marshall Mix Design Marshall Mix Design
Marshall Mix Design
 

Destacado

Construction of flexible pavement in brief.
Construction of flexible pavement in brief.Construction of flexible pavement in brief.
Construction of flexible pavement in brief.AJINKYA THAKRE
 
Pavement materials in Road Construction
Pavement materials in Road ConstructionPavement materials in Road Construction
Pavement materials in Road Constructionsrinivas2036
 
Construction of flexible pavement
Construction of flexible pavementConstruction of flexible pavement
Construction of flexible pavementUTU Dehradun
 
Design Of Flexible Pavements
Design Of Flexible PavementsDesign Of Flexible Pavements
Design Of Flexible Pavementswhutton1
 

Destacado (6)

Road materials
Road materialsRoad materials
Road materials
 
Construction of flexible pavement in brief.
Construction of flexible pavement in brief.Construction of flexible pavement in brief.
Construction of flexible pavement in brief.
 
Pavement materials in Road Construction
Pavement materials in Road ConstructionPavement materials in Road Construction
Pavement materials in Road Construction
 
Construction of flexible pavement
Construction of flexible pavementConstruction of flexible pavement
Construction of flexible pavement
 
Sieve analysis test of sand (video version check https://www.youtube.com/watc...
Sieve analysis test of sand (video version check https://www.youtube.com/watc...Sieve analysis test of sand (video version check https://www.youtube.com/watc...
Sieve analysis test of sand (video version check https://www.youtube.com/watc...
 
Design Of Flexible Pavements
Design Of Flexible PavementsDesign Of Flexible Pavements
Design Of Flexible Pavements
 

Similar a Flexible pavement presentation

pavement engineering 17-10-20 (2) (2).pptx
pavement engineering 17-10-20 (2) (2).pptxpavement engineering 17-10-20 (2) (2).pptx
pavement engineering 17-10-20 (2) (2).pptxlogeshwari jambunathan
 
flexiblepavementpresentation-161120101101 (1).pptx
flexiblepavementpresentation-161120101101 (1).pptxflexiblepavementpresentation-161120101101 (1).pptx
flexiblepavementpresentation-161120101101 (1).pptxSagarLutya1
 
Lecture one_introffffffffffffduction.pdf
Lecture one_introffffffffffffduction.pdfLecture one_introffffffffffffduction.pdf
Lecture one_introffffffffffffduction.pdfOmarAbdi39
 
Seminar Presentation "Pavements failures and their maintenance"
Seminar Presentation "Pavements failures and their maintenance"Seminar Presentation "Pavements failures and their maintenance"
Seminar Presentation "Pavements failures and their maintenance"ctakshaykumar1
 
ROADS/PAVEMENT & TYPES OF ROAD BY ENGR SAAD ULLAH WEC
ROADS/PAVEMENT  &  TYPES OF ROAD BY ENGR SAAD ULLAH WECROADS/PAVEMENT  &  TYPES OF ROAD BY ENGR SAAD ULLAH WEC
ROADS/PAVEMENT & TYPES OF ROAD BY ENGR SAAD ULLAH WECSAAD ULLAH
 
Minor Project on design and analysis of flexible pavement with cement treated...
Minor Project on design and analysis of flexible pavement with cement treated...Minor Project on design and analysis of flexible pavement with cement treated...
Minor Project on design and analysis of flexible pavement with cement treated...PrashannaKumar2
 
Study on comparative flexible pavement thickness analysis using various desig...
Study on comparative flexible pavement thickness analysis using various desig...Study on comparative flexible pavement thickness analysis using various desig...
Study on comparative flexible pavement thickness analysis using various desig...eSAT Publishing House
 
highwaymaterial-150329085516-conversion-gate01 (1).pdf
highwaymaterial-150329085516-conversion-gate01 (1).pdfhighwaymaterial-150329085516-conversion-gate01 (1).pdf
highwaymaterial-150329085516-conversion-gate01 (1).pdfshainacivil
 
Seminar report-3rd sem.pdf
Seminar report-3rd sem.pdfSeminar report-3rd sem.pdf
Seminar report-3rd sem.pdframbhuvansonkar1
 
journal publishing, how to publish research paper, Call For research paper, i...
journal publishing, how to publish research paper, Call For research paper, i...journal publishing, how to publish research paper, Call For research paper, i...
journal publishing, how to publish research paper, Call For research paper, i...IJERD Editor
 
Highway failure & their maintenance seminar report
Highway failure & their maintenance seminar reportHighway failure & their maintenance seminar report
Highway failure & their maintenance seminar reportBeing Deepak
 
Bituminous Pavement Failures
Bituminous Pavement FailuresBituminous Pavement Failures
Bituminous Pavement FailuresIJERA Editor
 
highway materials and desihn.pptx
highway materials and desihn.pptxhighway materials and desihn.pptx
highway materials and desihn.pptxSekharJ4
 

Similar a Flexible pavement presentation (20)

pavement engineering 17-10-20 (2) (2).pptx
pavement engineering 17-10-20 (2) (2).pptxpavement engineering 17-10-20 (2) (2).pptx
pavement engineering 17-10-20 (2) (2).pptx
 
flexiblepavementpresentation-161120101101 (1).pptx
flexiblepavementpresentation-161120101101 (1).pptxflexiblepavementpresentation-161120101101 (1).pptx
flexiblepavementpresentation-161120101101 (1).pptx
 
Pavements and paths
Pavements and pathsPavements and paths
Pavements and paths
 
Types of pavement
Types of pavementTypes of pavement
Types of pavement
 
Lecture one_introffffffffffffduction.pdf
Lecture one_introffffffffffffduction.pdfLecture one_introffffffffffffduction.pdf
Lecture one_introffffffffffffduction.pdf
 
Seminar Presentation "Pavements failures and their maintenance"
Seminar Presentation "Pavements failures and their maintenance"Seminar Presentation "Pavements failures and their maintenance"
Seminar Presentation "Pavements failures and their maintenance"
 
ROADS/PAVEMENT & TYPES OF ROAD BY ENGR SAAD ULLAH WEC
ROADS/PAVEMENT  &  TYPES OF ROAD BY ENGR SAAD ULLAH WECROADS/PAVEMENT  &  TYPES OF ROAD BY ENGR SAAD ULLAH WEC
ROADS/PAVEMENT & TYPES OF ROAD BY ENGR SAAD ULLAH WEC
 
6. road & highways
6. road & highways6. road & highways
6. road & highways
 
Minor Project on design and analysis of flexible pavement with cement treated...
Minor Project on design and analysis of flexible pavement with cement treated...Minor Project on design and analysis of flexible pavement with cement treated...
Minor Project on design and analysis of flexible pavement with cement treated...
 
M1303078488
M1303078488M1303078488
M1303078488
 
Pavement damage
Pavement damagePavement damage
Pavement damage
 
Unit 3
Unit 3Unit 3
Unit 3
 
Study on comparative flexible pavement thickness analysis using various desig...
Study on comparative flexible pavement thickness analysis using various desig...Study on comparative flexible pavement thickness analysis using various desig...
Study on comparative flexible pavement thickness analysis using various desig...
 
Unit 4
Unit 4Unit 4
Unit 4
 
highwaymaterial-150329085516-conversion-gate01 (1).pdf
highwaymaterial-150329085516-conversion-gate01 (1).pdfhighwaymaterial-150329085516-conversion-gate01 (1).pdf
highwaymaterial-150329085516-conversion-gate01 (1).pdf
 
Seminar report-3rd sem.pdf
Seminar report-3rd sem.pdfSeminar report-3rd sem.pdf
Seminar report-3rd sem.pdf
 
journal publishing, how to publish research paper, Call For research paper, i...
journal publishing, how to publish research paper, Call For research paper, i...journal publishing, how to publish research paper, Call For research paper, i...
journal publishing, how to publish research paper, Call For research paper, i...
 
Highway failure & their maintenance seminar report
Highway failure & their maintenance seminar reportHighway failure & their maintenance seminar report
Highway failure & their maintenance seminar report
 
Bituminous Pavement Failures
Bituminous Pavement FailuresBituminous Pavement Failures
Bituminous Pavement Failures
 
highway materials and desihn.pptx
highway materials and desihn.pptxhighway materials and desihn.pptx
highway materials and desihn.pptx
 

Último

sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfsdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfJulia Kaye
 
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxIT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxSAJITHABANUS
 
Transforming Process Safety Management: Challenges, Benefits, and Transition ...
Transforming Process Safety Management: Challenges, Benefits, and Transition ...Transforming Process Safety Management: Challenges, Benefits, and Transition ...
Transforming Process Safety Management: Challenges, Benefits, and Transition ...soginsider
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxKISHAN KUMAR
 
ASME BPVC 2023 Section I para leer y entender
ASME BPVC 2023 Section I para leer y entenderASME BPVC 2023 Section I para leer y entender
ASME BPVC 2023 Section I para leer y entenderjuancarlos286641
 
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS Bahzad5
 
Design of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxDesign of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxYogeshKumarKJMIT
 
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdfRenewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdfodunowoeminence2019
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchrohitcse52
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Akarthi keyan
 
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Engineering Mechanics  Chapter 5  Equilibrium of a Rigid BodyEngineering Mechanics  Chapter 5  Equilibrium of a Rigid Body
Engineering Mechanics Chapter 5 Equilibrium of a Rigid BodyAhmadHajasad2
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptxSaiGouthamSunkara
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfGiovanaGhasary1
 
Gender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 ProjectGender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 Projectreemakb03
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxNaveenVerma126
 

Último (20)

Litature Review: Research Paper work for Engineering
Litature Review: Research Paper work for EngineeringLitature Review: Research Paper work for Engineering
Litature Review: Research Paper work for Engineering
 
Lecture 4 .pdf
Lecture 4                              .pdfLecture 4                              .pdf
Lecture 4 .pdf
 
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfsdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
 
Présentation IIRB 2024 Marine Cordonnier.pdf
Présentation IIRB 2024 Marine Cordonnier.pdfPrésentation IIRB 2024 Marine Cordonnier.pdf
Présentation IIRB 2024 Marine Cordonnier.pdf
 
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptxIT3401-WEB ESSENTIALS PRESENTATIONS.pptx
IT3401-WEB ESSENTIALS PRESENTATIONS.pptx
 
Transforming Process Safety Management: Challenges, Benefits, and Transition ...
Transforming Process Safety Management: Challenges, Benefits, and Transition ...Transforming Process Safety Management: Challenges, Benefits, and Transition ...
Transforming Process Safety Management: Challenges, Benefits, and Transition ...
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptx
 
ASME BPVC 2023 Section I para leer y entender
ASME BPVC 2023 Section I para leer y entenderASME BPVC 2023 Section I para leer y entender
ASME BPVC 2023 Section I para leer y entender
 
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS GENERAL CONDITIONS  FOR  CONTRACTS OF CIVIL ENGINEERING WORKS
GENERAL CONDITIONS FOR CONTRACTS OF CIVIL ENGINEERING WORKS
 
Design of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxDesign of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptx
 
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdfRenewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
Renewable Energy & Entrepreneurship Workshop_21Feb2024.pdf
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part A
 
計劃趕得上變化
計劃趕得上變化計劃趕得上變化
計劃趕得上變化
 
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Engineering Mechanics  Chapter 5  Equilibrium of a Rigid BodyEngineering Mechanics  Chapter 5  Equilibrium of a Rigid Body
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptx
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdf
 
Gender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 ProjectGender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 Project
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
 
Lecture 2 .pptx
Lecture 2                            .pptxLecture 2                            .pptx
Lecture 2 .pptx
 

Flexible pavement presentation

  • 1. FLEXIBLE PAVEMENT THEORY AND DESIGN Guide : Dr. Shashikant Sharma, Assistant prof. Civil engineering department. NATIONAL INSTITUTE OF TECHNOLOGY, HAMIRPUR DEPT. OF CIVIL ENGINEERING, 2016
  • 2. THEORY OF FLEXIBLE PAVEMENT : 26/10/20162 Presented by:  Md. Taiyab Jawed (16M144)  Pawan Kumar (16M145)  Gyandeep Singh Arya (16M146)
  • 3. What is pavement ?  A structure consisting of superimposed layers of processed materials above the natural soil sub- grade, whose primary function is to distribute the applied vehicle loads to the sub-grade. 26/10/20163
  • 5. Flexible pavement: 26/10/20165  Flexible pavements are those which on a whole have low or negligible flexural strength and rather flexible in their structural action under load.
  • 6. Load transfer: 26/10/20166  Load is transferred to the lower layer by grain to grain distribution as shown in the figure given below;
  • 7. Load Transfer (continue …) 26/10/20167  The wheel load acting on the pavement will be distributed to a wider area, and the stress decreases with the depth. Flexible pavement layers reflect the deformation of the lower layers on to the surface layer
  • 8. TYPICAL LAYERS OF A FLEXIBLE PAVEMENT : 26/10/20168  Typical layers of a conventional flexible pavement includes seal coat, surface course, tack coat, binder course, prime coat, base course, sub-base course, compacted sub-grade, and natural sub-grade.
  • 9. TYPICAL LAYERS OF A FLEXIBLE PAVEMENT 26/10/20169  Seal coat is a thin surface treatment used to water- proof the surface and to provide skid resistance.  Tack coat is a very light application of asphalt emulsion diluted with water. And It provides bonding between two layers of binder course.  Prime coat is an application of low viscous cutback bitumen to an absorbent surface like granular bases on which binder layer is placed and provides bonding between two layers.
  • 10. TYPICAL LAYERS OF A FLEXIBLE PAVEMENT (Continue ….) 26/10/201610  Surface course is the layer directly in contact with traffic loads and are constructed with dense graded asphalt concrete.  Binder course purpose is to distribute load to the base course. Binder course requires lesser quality of mix as compared to course above it.  Base course provides additional load distribution and contributes to the sub-surface drainage
  • 11. TYPICAL LAYERS OF A FLEXIBLE PAVEMENT (Continue ….) 26/10/201611  Sub-base course the primary functions are to provide structural support, improve drainage, and reduce the intrusion of fines from the sub-grade in the pavement structure  Sub-grade The top soil or sub-grade is a layer of natural soil prepared to receive the stresses from the layers above
  • 12. FACTORS AFFECTING PAVEMENT DESIGN 26/10/201612  1. Design Wheel Load  Max. Wheel load  Axle configuration  Contact pressure  ESWL.  Repetition of loads  2. Climatic Factor  3. Pavement component material
  • 13. Design Wheel Load. 26/10/201613  Max. Wheel load - It is used to determine the depth of the pavement required to ensure that the subgrade soil does not fail.  Contact pressure - It determines the contact area and the contact pressure between the wheel and the pavement surface. For simplicity elliptical contact area is consider to be circular.
  • 14. Design Wheel Load (Continue) 26/10/201614  Axle configuration - the axle configuration is important to know the way in which the load is applied on the pavement surface.
  • 15. Design Wheel Load (Continue) 26/10/201615  Equivalent single wheel load (ESWL)
  • 16. Design Wheel Load (Continue) 26/10/201616  Repetition of loads :  Each load application causes some deformation and the total deformation is the summation of all these.  Although the pavement deformation due to single axle load is very small, the cumulative effect of number of load repetition is significant.  Therefore, modern design is based on total number of standard axle load (usually 80 KN single axle)
  • 17. Climatic Factor 26/10/201617  1. Temperature -  Wide temperature variations may cause damaging effects.  Pavement becomes soft in hot weather and brittle in very cold weather.  2. Variation in moisture condition –  It depends on type of the pavement, type of soil type, ground water variation etc.  It can be controlled by providing suitable surface and sub- surface drainage.
  • 18. Characteristic of Pavement material 26/10/201618  1. California bearing ratio- It determines the strength of soil sub-grade, sub-base or base and it is used for the design of pavement.  2. Elastic modulus -It measures the materials resistance to being deformed elastically upon application of the wheel load.  3. Poisson Ratio – It is the ratio of lateral strain to the axial strain caused by a load parallel axis along axial strain.  4. Resilient modulus- The elastic modulus based on the recoverable strain under repeated loads is called the resilient modulus MR =σd/σr .
  • 19. Characteristic of Pavement material (Continue ….) 26/10/201619  The following material properties are consider for both flexible and rigid pavements.  When pavements are considered as linear elastic, the elastic moduli and poisson ratio are specified.  If the elastic modulus of a material varies with the time of loading, then the resilient modulus is selected.
  • 20. Design procedures for flexible pavements: 26/10/201620 Design Procedures Empirical Design Mechanistic- Empirical Design Mechanistic Design IRC:37-2012 is based on Mechanistic-Empirical Design
  • 21. Mechanistic-empirical design 26/10/201621  1. It can be used for both existing pavement rehabilitation and new pavement construction  2. It can accommodate changing load types  3. It uses material proportion that relates better with actual pavement performance  4. It provides more reliable performance predictions
  • 22. Failures of flexible pavements: 26/10/201622  Different types of failure encountered in flexible pavements are as follow.  1. Alligator cracking or Map cracking (Fatigue)  2. Consolidation of pavement layers (Rutting)  3. Shear failure cracking  4. Longitudinal cracking  5. Frost heaving  6. Lack of binding to the lower course  7. Reflection cracking  8. Formation of waves and corrugation  9. Bleeding  10. Pumping
  • 23. 1. ALLIGATOR OR MAP CRACKING (FATIGUE CRACKING) 26/10/201623  Followings are the primary causes of this type of failure.  Relative movement of pavement layer material  Repeated application of heavy wheel loads  Swelling or shrinkage of subgrade or other layers due to moisture variation
  • 24. 2. CONSOLIDATION OF PAVEMENT LAYERS (RUTTING) 26/10/201624  Formation of ruts falls in this type of failure.  A rut is a depression or groove worn into a road by the travel of wheels.  This type of failure is caused due to following reasons.  •Repeated application of load along the same wheel path resulting longitudinal ruts.  •Wearing of the surface course along the wheel path resulting shallow ruts.
  • 25. 3. SHEAR FAILURE CRACKING: 26/10/201625  Shear failure causes upheaval of pavement material by forming a fracture or cracking.  Followings are the primary causes of shear failure cracking.  •Excessive wheel loading  •Low shearing resistance of pavement mixture
  • 26. 4. LONGITUDINAL CRACKING: 26/10/201626  This types of cracks extents to the full thickness of pavement.  The following are the primary causes of longitudinal cracking.  Differential volume changes in subgrade soil  Settlement of fill materials  Sliding of side slopes
  • 27. 5. FROST HEAVING: 26/10/201627  Frost heaving causes upheaval of localized portion of a pavement. The extent of frost heaving depends upon the ground water table and climatic condition.
  • 28. 6. LACK OF BINDING WITH LOWER LAYER (POTHOLES & SLIPPAGE) 26/10/201628  When there is lack of binding between surface course and underlying layer, some portion of surface course looses up materials creating patches and potholes.  Slippage cracking is one form of this type of failure.  Lack of prime coat or tack coat in between two layers is the primary reason behind this type of failure.
  • 29. 7. REFLECTION CRACKING: 26/10/201629  This type of failure occurs, when bituminous surface course is laid over the existing cement concrete pavement with some cracks. This crack is reflected in the same pattern on bituminous surface.
  • 30. 8. FORMATION OF WAVES & CORRUGATION : 26/10/201630  Transverse undulations appear at regular intervals due to the unstable surface course caused by stop-and- go traffic.
  • 31. 9. BLEEDING: 26/10/201631  Excess bituminous binder occurring on the pavement surface causes bleeding. Bleeding causes a shiny, glass-like, reflective surface that may be tacky to the touch. Usually found in the wheel paths.
  • 32. 10. PUMPING: 26/10/201632  Seeping or ejection of water and fines from beneath the pavement through cracks is called pumping
  • 33. FAILURES OF FLEXIBLE PAVEMENTS DESIGN CONSIDERATION: 26/10/201633  The design of flexible pavement as per IRC is based on two major failure that are, fatigue cracking and rutting failure.
  • 34. IRC METHOD OF DESIGN OF FLEXIBLE PAVEMENTS (IRC: 37-2012) 26/10/201634  1. IRC:37-1970  based on California Bearing Ratio (CBR) of subgrade  Traffic in terms of commercial vehicles (more than 3 tonnes laden weight)  2. IRC:37-1984  based on California Bearing Ratio (CBR) of subgrade  Design traffic was considered in terms of cumulative number of equivalent standard axle load of 80 kN in millions of standard axles (msa)  Design charts were provided for traffic up to 30 msa using an empirical approach.  .
  • 35. Continue …. 26/10/201635  3. IRC:37-2001  based on Mechanistic-Empirical method  Pavements were required to be designed for traffic as high as 150 msa.  The limiting rutting is recommended as 20 mm in 20 per cent of the length for design traffic  4. IRC:37-2012  based on Mechanistic-Empirical method  The limiting rutting is recommended as 20 mm in 20 per cent of the length for design traffic up to 30 msa and 10 per cent of the length for the design traffic beyond
  • 36. Guidelines for Design by IRC: 37: 2012 26/10/201636  Design Traffic:  The recommended method considers design traffic in terms of the cumulative number of standard axles (80 kN) to be carried by the pavement during the design life.  Only the number of commercial vehicles having gross vehicle weight of 30 kN or more and their axle- loading is considered for the purpose of design of pavement.  Assessment of the present day average traffic should be based on seven-day-24-hour count made in accordance with IRC: 9-1972 "Traffic Census on Non-Urban Roads".
  • 37. Traffic growth rate (r): 26/10/201637  Estimated by Analyzing:  The past trends of traffic growth,  Change in demand of Traffic by factors like specific development, Land use changes etc.  If the data for the annual growth rate of commercial vehicles is not available or if it is less than 5 per cent, a growth rate of 5 per cent should be used (IRC:SP:84-2009).
  • 38. Design life (n) 26/10/201638  The design life is defined in terms of the cumulative number of standard axles in msa that can be carried before a major strengthening, rehabilitation or capacity augmentation of the pavement is necessary.  Depending upon road type, Design traffic is ranges from 10 to 15 years.
  • 39. Vehicle damage factor (VDF) 26/10/201639  It is defined as equivalent number of standard axles per commercial vehicle.  The Vehicle Damage Factor (VDF) is a multiplier to convert the number of commercial vehicles of different axle loads and axle configuration into the number of repetitions of standard axle load of magnitude 80 kN. 
  • 42. Sample Size for Axle Load Survey: 26/10/201642
  • 43. Lane distribution factor 26/10/201643  Distribution of commercial traffic in each direction and in each lane is required for determining the total equivalent standard axle load applications to be considered in the design.  In the absence of adequate and conclusive data, the following distribution may be assumed until more reliable data on placement of commercial vehicles on the carriageway lanes are available:
  • 44. Lane distribution calculation: 26/10/201644  1) Single-lane roads:  2) Two-lane single carriageway roads:  3) Four-lane single carriageway roads:  4) Dual carriageway roads:
  • 45. Computation of Design traffic: 26/10/201645  The design traffic in terms of the cumulative number of standard axles to be carried during the design life of the road should be computed using the following equation:
  • 46. Sub-grade 26/10/201646  Requirements of CBR: Sub grade is made up of in- situ material, select soil or stabilized soil.  Compacted to a minimum of 97% of laboratory dry density achieved with heavy compaction.  Minimum CBR of 8% for traffic > 450 CVPD  CBR can also be determined from Dynamic Cone Penetrometer (60º cone) by ..  Log10 CBR = 2.465-1.12log10 N  Where, N = mm/blow
  • 47. Sub-grade (Continue…) 26/10/201647  Where different types of soils are used in sub grade minimum 6 to 8 average value for each type is required.  90th percentile for high volume and 80th percentile for other category of road is adopted as design CBR .  Maximum permissible variation  Where variation is more average CBR should be average of 6 samples and not three.
  • 48. Effective CBR 26/10/201648  Where there is significant difference between the CBRs of the select sub grade and embankment soils, the design should be based on effective CBR. The effective CBR of the subgrade can be determined from Fig.
  • 49. Lab procedure for CBR calculation: 26/10/201649  The test must always be performed on remoulded samples of soils in the laboratory.  The pavement thickness should be based on 4-day soaked CBR value of the soil, remoulded at placement density and moisture content ascertained from the compaction curve.  In areas with rainfall less than 1000 mm, four day soaking is too severe a condition for well protected sub-grade with thick bituminous layer and the strength of the sub-grade soil may be underestimated.
  • 50. Continue …. 26/10/201650  If data is available for moisture variation in the existing in-service pavements of a region in different seasons, molding moisture content for the CBR test can be based on field data.  Wherever possible the test specimens should be prepared by static compaction. Alternatively dynamic compaction may also be used.
  • 51. Resilient Modulus: 26/10/201651  Resilient modulus is the measure of its elastic behavior determined from recoverable deformation in the laboratory tests.  The modulus is an important parameter for design and the performance of a pavement.  The relation between resilient modulus and the effective CBR is given as:
  • 52. Continue …. 26/10/201652  The CBR of the sub-grade should be determined as per IS: 2720 (Part 16) (36) at the most critical moisture conditions likely to occur at site.
  • 53. Principle of pavement design: 26/10/201653  Pavement Model:  Modeled as linear elastic multilayer structure.  Stress Analysis is based on IITPave software  Critical parameters for analysis are  1. Tensile strain at the bottom of bituminous layer  2. Vertical sub-grade strain at the top of sub-grade.  Failure of pavement is considered due to cracking and rutting
  • 54. Check for Fatigue: 26/10/201654  Micro cracks at the bottom of bituminous layer are developed with every load repetition  These cracks goes on expending till they propagate to the surface due to the large load repetition  In these guidelines, cracking in 20 per cent area has been considered for traffic up to 30 msa and 10 per cent for traffic beyond that.
  • 55. Check for Fatigue (Continue….) 26/10/201655  Two fatigue equations developed based on performance data collected during various study are  Nf= 2.21 * 10-04x [1/εt]3.89* [1/MR]0.854 (80 % reliability)…(a)  Nf= 0.711 * 10-04x [1/εt]3.89* [1/MR]0.854 (90 % reliability)...(b)  Where,  Nf= fatigue life in number of standard axles,  εt= Maximum Tensile strain at the bottom of the bituminous layer, and  MR= resilient modulus of the bituminous layer.  Equation for 90% reliability implies that only 10% of the pavement area will have more than 20% cracks.
  • 56. Check for Fatigue (Continue….) 26/10/201656  To consider the effect of volume of the bitumen and air voids equation (b) is modified as follows  Nf =0.5161 * C * 10-04 x [1/ εt]3.89 * [1/MR]0.854………(c)  Va= per cent volume of air void and Vb= per cent volume of bitumen in a given volume of bituminous mix.  Nf= fatigue life, єt= maximum tensile strain at the bottom of DBM.  MR= Resilient modulus of bituminous mix.  For traffic < 30 msa consider equation (a); For traffic > 30msa equation (c) is recommened.
  • 57. Check for Rutting: 26/10/201657  Rutting is the permanent deformation in pavement usually occurring longitudinally along the wheel path.  Causes –  1. Deformation in sub grade /non-bituminous layer  2. Secondary compaction and shear deformation of bituminous layer  Limiting value  20 mm in 20% length for upto 30 msa  20 mm in 10% length for > 30 msa  Rutting affects the serviceability of pavement.
  • 58. Rutting (Continue …) 26/10/201658  Based on various studies the two equation develops are;  N = 4.1656 x 10-08[1/εv]4.5337 (80 per cent reliability)  N = 1.41x 10-8x [1/εv]4.5337 (90 per cent reliability)  Where,  N = Number of cumulative standard axles, and  εv= Vertical strain in the sub-grade
  • 59. Pavement composition as per IRC: 26/10/201659  A flexible pavement covered in these guidelines consists of different layers as shown in figure;
  • 60. SUB-BASE LAYER 26/10/201660  UNBOUND SUB-BASE LAYER  Sub-base materials may consist of natural sand, moorum, gravel, laterite, kankar, brick metal, crushed stone, crushed slag  Sub-base materials passing 425 micron sieve when tested in accordance with IS:2720 (Part 5) should have liquid limit and plasticity index of not more than 25 and 6 respectively.
  • 61. SUB-BASE LAYER(Unbound SB Continue…) 26/10/201661  When coarse graded sub-base is used as a drainage layer, Los Angeles abrasion < 40  Required permeability; fines passing 0.075 mm should be less than 2 per cent.  Sub-base is constructed in two layers, the lower layer forms the separation/filter layer to prevent intrusion of subgrade soil into the pavement and the upper GSB forms the drainage layer to drain away any water  Resilient modulus (MR) for granular sub-base  MRgsb = 0.2 h0.45 * MR subgrade  Where, h = thickness of sub-base layer in mm
  • 62. SUB-BASE LAYER 26/10/201662  Bound Sub base  Material for bound sub-base may consist of soil, aggregate or soil aggregate mixture modified with chemical stabilizers such as cement, lime-flyash.  The drainage layer of the sub-base may consist of coarse graded aggregates bound with about 2 per cent cement while retaining the permeability.  Drainage and separation layers are essential when water is likely to enter into pavements from the shoulder, median or through the cracks in surface layer.
  • 63. SUB-BASE LAYER(Unbound SB Continue…) 26/10/201663  Strength Parameter:  Elastic Modulus E of bound sub-bases is  Ecgsb = 1000 * UCS  Where UCS = 28 day strength of the cementitious granular material
  • 64. BASE LAYER 26/10/201664  UNBOUND BASE LAYER  Base layer may consist of wet mix macadam, water bound macadam, crusher run macadam, reclaimed concrete etc.  Resilient modulus of the granular base is given as..  MR granular = 0.2 * h0.45 MR subgrade  Where h = thickness of granular sub-base and base, mm  Poisson's ratio of granular bases and sub-bases is recommended as 0.35.
  • 65. BASE LAYER(Continue..) 26/10/201665  CEMENTITIOUS BASES :  Cemented base layers may consist of aggregates or soils or both stabilized with chemical stabilizers, to give a minimum strength of 4.5 to 7 MPa in 7/28 days.  Default values of modulus of rupture are recommended for cementitious bases (MEPDG).  Cementitious stabilized aggregates - 1.40 MPa  Lime—flyash-soil - 1.05 MPa  Soil cement - 0.70 MPa  Poisson's ration of the cemented layers may be taken as 0.25.
  • 66. Criteria for selecting Bitumen grade. 26/10/201666  The recommended resilient modulus values of the bituminous materials with different binders are:
  • 67. Continue ….. 26/10/201667  The Poisson’s ratio of bituminous layer depends upon the pavement temperature and a value of 0.35 is recommended for temperature up to 35°C and value of 0.50 for higher temperatures.  Higher viscosity of bituminous binders, which can be achieved either by using higher viscosity grade bitumen or modified bitumen will improve both fatigue and rutting behavior of mixes as compared to mixes with normal bitumen.  Fatigue equation at any pavement temperature from 20°C to 40°C can be evaluated by substituting the appropriate value of the resilient modulus of the bituminous mix, air void and volume of bitumen. Catalogue of designs has been worked out for a temperature of 35°C.
  • 68. Drainage Layer 26/10/201668  Improvement of drainage can significantly reduce the magnitude of seasonal heave. The desirable requirements are:  (a). Provision must be made for the lateral drainage of the pavement structural section. The granular sub-base/base should accordingly be extended across the shoulders  (b). No standing water should be allowed on either side of the road embankment.  (c). A minimum height of1 m between the subgrade level and the highest water level
  • 69. Drainage Layer(Continue…) 26/10/201669  Some typical drainage system is illustrated in following Figs….  Fig.1 Pavement along a Slope
  • 70. Drainage Layer(Continue…) 26/10/201670  Fig. 2 Pavement with Filter and Drainage Layers
  • 71. Drainage Layer(Continue…) 26/10/201671  Criteria to be satisfied:  The filter/separation layer should satisfy the following criteria:  To prevent entry of soil particles into the drainage layer:  D85 means the size of sieve that allows 85 per cent by weight of the material to pass through it.  Similar is the meaning of D50 and D15.
  • 72. DESIGN OF FLEXIBLE PAVEMENT : 26/10/201672 Presented by:  Aditya Upadhya (16M150)  Aniruddha Chopadekar (16M151)  Samarth Bhatia (16M152)
  • 73. What is design ? 26/10/201673  Design of pavement includes deciding the number of layers, its composition and thickness for selected material, to support traffic load safely without failure.
  • 74. Various cases in design. 26/10/201674  The flexible pavement with different combinations of traffic loads and material properties.  1) Granular base and Granular sub-base.  2) Cementitious base and sub-base with agg. Interlayer.  3) Cementitious base and sub-base with SAMI.  4) RAP agg. Over cemented sub-base  5) Cemented base and Granular sub-base
  • 75. Problem statement. 26/10/201675  Design the pavement for construction of a new flexible pavement with the following data:  Four lanes divided National Highway.  Design life is 15 years.
  • 76. Data collection 26/10/201676  Material properties :  California Bearing Ratio (CBR)  Resilient Modulus (MR)  Modulus of Elasticity (E)  Poisson’s ratio (µ)
  • 77. Material properties 26/10/201677  CBR : The CBR values are calculated after every kilometre on selected stretch of 10 km having the same type of soil. Suppose the values obtained are: 3.8, 2.8, 4.5, 3.9, 4.2, 2.9, 4.7, 4.3, 4.0 and 4.6%. Based on the collected data the design CBR (90th percentile CBR) is calculated as below:
  • 78. Solution : 26/10/201678  Arrange in ascending order : 2.8, 2.9, 3.8, 3.9, 4.0, 4.2, 4.3, 4.5, 4.6 and 4.7.  Calculate the percentage greater than equal of the value as follows:  For CBR of 3.8, percentage of values greater than equal to 3.8 = (8/10) x100 = 80%  Similarly for 2.8 % is 100%, 4.5% CBR is 80% and so on.  Now a plot is made between Percentages of values greater than equal to the CBR values versus the CBR as follows.
  • 79. Continue … 26/10/201679 RESULT : The 90th Percentile CBR value is 2.90%
  • 80. Effective CBR: 26/10/201680  (Figure 5.1, Page 11, IRC: 37: 2012)
  • 81. Poisson’s ratio 26/10/201681  Poisson’s ratio µ is define as the ratio of lateral strain (ɛl) to the axial strain (ɛa), caused by load parallel to the axis along which ɛa is measured.  It is found that for most of the pavement structures, the influence of µ value is normally small.  For most of cement treated materials (soil cement, cement treated base, lean concrete and PCC), the value of µ normally lies between 0.10 and 0.25.  Unbound granular material lie between 0.2 and 0.5 and those for bituminous mixes range from 0.35 to 0.50
  • 82. Elastic modulus 26/10/201682  Elastic moduli of various pavement materials are obtained either through tests or through the recommendations available in the guidelines.  Repeated flexure or indirect tensile tests are carried out to determine the dynamic modulus Ed of bituminous mixes.
  • 83. Resilient modulus 26/10/201683  Resilient modulus is the measure of its elastic behaviour determined from recoverable deformation in the laboratory tests.  The behaviour of the subgrade is essentially elastic under the transient traffic loading with negligible permanent deformation in a single pass.  This can be determined in the laboratory by conducting tests.
  • 84. Calculation of MR for Sub-grade. 26/10/201684  The resilient modulus is calculated as follow;  MR (Mpa) = 10 x CBR …………. For CBR 5 = 17.6 x CBR0.64 ………For CBR > 5  (From equation 5.2, Page no. 12, IRC: 37: 2012)
  • 85. Calculation of MR for Granular base and sub-base. 26/10/201685  The resilient modulus is calculated as follow;  MRgsb = 0.20 x h0.45 x MR subgrade  h = Thickness of sub-base layer in mm, …… sub- base,  = Cumulative thickness of Base layer and Sub- base layer in mm ... for base
  • 86. Traffic count 26/10/201686  Assessment of average daily traffic should be normally based on 7 day-24hr count made in accordance with IRC: 9 “Traffic census on non-urban roads”.  Classify traffic into different categories such as two wheelers, three wheelers, passenger cars, trucks etc.  But only commercial vehicle with laden weight > 3 tonne is taken into consideration of design.  Commercial vehicles are further categorised as single axle single wheel, single axel dual wheel, Tandem axle dual wheel and Tridem axle dual wheel.  Where no traffic count data is available, data from roads of similar classification and importance may be used to predict the design traffic
  • 87. Calculation of Design factor 26/10/201687  1) Design Traffic,  2) Axle load survey,  3) Vehicle Damage Factor  4) Lane Distribution Factor
  • 88. Design Traffic: 26/10/201688  Initial traffic after construction in terms of number of Commercial Vehicles per day (CVPD).  Traffic growth rate during the design life in percentage.  Design life in number of years.  Spectrum of axle loads.  Vehicle Damage Factor (VDF).  Distribution of commercial traffic over the carriageway.
  • 89. Calculation of Design traffic: 26/10/201689  For our case the number of heavy commercial vehicle per day is taken as 7 day average for 24 hour count comes to be 2792 vehicle per day as per the last count.  i. e. P = 2792 cvpd, r = 7 %, and x = 10 years  A = 2792 (1+0.07)10 = 5000 cvpd.  RESULT: Traffic in the year of completion of construction is 5000 cvpd in both the directions.
  • 90. Axle load survey : 26/10/201690  Required for VDF calculation and Fatigue damage analysis of cementitious base.  The axle load spectrum is formulated by considering 10 kN, 20 kN and 30 kN intervals for single, tandem and tridem axle respectively.  RESULT: As per study the percentage of Single, Tandom and Tridom axle are 45%, 45% and 10% respectively
  • 91. Axle load spectrum 26/10/201691 Single Axle Load Tandem Axle Load Tridem Axle Load Axle load Class (KN) Percentage of Axles Axle load Class (KN) Percentage of Axles Axle load Class (KN) Percentage of Axles 185-195 0.64 390-410 1.85 585-615 1.40 175-185 0.80 370-390 2.03 555-585 1.60 165-175 0.80 350-370 2.03 525-555 1.60 155-165 2.58 330-350 2.08 495-525 1.80 145-155 2.58 310-330 2.08 465-495 1.80 135-145 5.80 290-310 4.17 435-465 4.40 125-135 5.80 270-290 4.17 405-435 4.40 115-125 11.82 250-270 12.67 375-405 13.10 105-115 11.82 230-250 12.67 345-375 13.10 95-105 12.90 210-230 10.45 315-345 10.90 85-95 12.16 190-210 10.45 285-315 10.40 < 85 32.30 170-190 7.05 255-285 7.15 <170 28.28 <255 28.33 Total 100 100 100
  • 92. Vehicle damage factor 26/10/201692  The formula to calculate VDF is given as follows:  W1, W2, ….. are the mean values of the various axle load groups.  V1, V2, …. are the respective traffic volumes.  Ws is the standard axle load.  Standard axle load for Single axle, Tandem axle and Tridem axle is 80 KN, 148 KN and 224 KN as per IRC: 37:2012 (Page 7)  RESULT: The VDF for Single axle load, Tandem axle load and Tridem axle load is 4.11, 8.37 and 7.51.
  • 93. Vehicle Damage factor (Continue.) 26/10/201693  Were sufficient information on axle loads are not available or the small size of project does not warrant an axle load survey the default values of VDF may be adopted as given in the table given below.
  • 94. Lane distribution factor. 26/10/201694  Distribution of commercial traffic in each direction and in each lane is required for determining the total equivalent standard axle load applications to be considered in the design.  Single lane road : Total vehicle in both direction.  Two lane single carriage way : 50% of total vehicle in both direction.  Four lane single carriage way : 40% of total vehicle in both direction.  Dual carriage way: Two lane 75%, Three lane 60%, Four lane 45% of number of CV in each direction.
  • 95. Lane distribution factor (Continue….) 26/10/201695  RESULT: In the present design problem we are given to design a four lane divided highway, therefore the Lane distribution factor is 75 percent of number of commercial vehicle in each direction.
  • 96. Million standard axle 26/10/201696  The design traffic is calculated in terms of cumulative number of standard axle of 80 kN carried during the design life of the road.  r = 7.5 %,  n = 20 yr. ( Expressway and Urban roads), 15 yr (NH and SH), In this problem we have to design National highway take n as 15 years,  A is 5000cvpd in both direction and 2500 in one direction
  • 97. Calculation of Million std. axle. 26/10/201697  Single axle load (N1): 45 percent vehicles are of single axle. A : 0.45 x 2500 = 1125, F : 4.11 N1 = 33.06 x 106 = 33.06 msa  Tandem axle load (N2): 45 percent vehicles are of tandem axle. A : 0.45 x 2500 = 1125, F : 8. 37 N2 = 67.33 x 106 = 67.33 msa  Tridem axle load (N3): 10 percent vehicles are of tridem axle. A : 0.10 x 2500 = 250, F : 7.51
  • 98. Calculation of Million std. axle. (Continue…) 26/10/201698  Total msa (N1+N2+N3)  = 33.06 + 67.33 + 13.42 = 113.81 ̴ 150 msa (Aprox.)  RESULT: The cumulative million standard axles to be consider for design is 150 msa.
  • 99. Determination pavement thickness 26/10/201699  Case 1 : Bituminous pavement with untreated granular layer
  • 100. Determination of thickness for Case 1 26/10/2016100  The thickness of various layers is determined with the help pavement design catalogue given in IRC: 37: 2012 from page 26 to 28, for various values of effective CBR.
  • 101. Determination of thickness for Case 1 (Continue ….) 26/10/2016101  RESULT:  For design traffic of 150msa and CBR of 7%  Thickness of subbase (GSB) is 230 mm,  Thickness of base (G. Base) is 250 mm,  Thickness of Dense Bitumen macadam (DBM) is 140 mm,  Thickness of Bituminous concrete (BC) is 50 mm
  • 102. Case 2 : Bituminous pavement with cemented base and cemented sub-base with aggregate inter layer of 100mm 26/10/2016102
  • 104. Determination of thickness for case 2. 26/10/2016104  RESULT:  For design traffic of 150msa and CBR of 7%  Thickness of Cementitious sub-base (CT Subbase) is 250 mm,  Thickness of Cementitious base (CT Base) is 120 mm, Aggregate interlayer is 100mm  Thickness of Dense Bitumen macadam (DBM) is 50 mm  Thickness of Bituminous concrete (BC) is 50 mm are  Obtained by interpolating the thickness of CBR 5% and 10%.
  • 105. Calculation of Resilient Modulus (MR) for case 2 26/10/2016105  MR subgrade = 17.6 x CBR0.64 = 17.6 x 70.64 = 61.15 Mpa.  MR Bituminous layer = 3000 Mpa (From table 7.1 Resilienent Modulus of Bituminous Mixes, page 23, IRC: 37: 2012)  Pavement composition for 90 per cent Reliability is BC + DBM = 100 mm,  Aggregate interlayer = 100 mm (MR = 450 MPa),  Cemented base = 120 mm (E = 5000 MPa),  Cemented subbase = 250 mm (E = 600 Mpa)
  • 106. Case 3 : Bituminous pavement with cemented base and cemented sub-base with SAMI layer over cemented base. 26/10/2016106
  • 107. Continue …. 26/10/2016107 PAGE 33 AND 34 OF IRC: 37: 2012
  • 108. Determination of thickness for Case 3 26/10/2016108 RESULT:  Design traffic of 150 msa and CBR of 7%  thickness of Cementitious sub-base (CT Subbase) is 250 mm,  Thickness of Cementitious base (CT Base) is 165 mm,  Thickness of Dense Bitumen macadam (DBM) is 50 mm  Thickness of Bituminous concrete (BC) is 50 mm are  obtained by interpolating the thickness of CBR 5% and 10%.
  • 109. Case 4 Bituminous pavement with base of fresh aggregate or RAP treated with foamed bitumen/ Bitumen emulsion and cemented sub-base 26/10/2016109
  • 110. Continue … 26/10/2016110 PAGE 36 AND 37 OF IRC: 37: 2012
  • 111. Determination of thickness for case 4 26/10/2016111  RESULT:  Design traffic of 150 msa and CBR of 7%  Thickness of Cementitious sub-base (CT Subbase) is 250 mm,  Thickness of Treater reclaimed aspalt pavement (Treated RAP) is 180 mm,  Thickness of Dense Bitumen macadam (DBM) is 50 mm  Thickness of Bituminous concrete (BC) is 50 mm are  Obtained by interpolating the thickness of CBR 5% and 10%.  Instead of RAP base of fresh aggregates treated with bitumen emulsion/ foamed bitumen can be used to obtain stronger base.
  • 112. Case 5 : Bituminous pavement with cemented base and granular sub-base with 100mm WMM layer over cemented base: 26/10/2016112
  • 114. Determination of thickness for case 5 26/10/2016114  RESULT:  Design traffic of 150 msa and CBR of 7%  Thickness of Granulated Subbase (GSB) is 250 mm  Cementitious sub-base (CT Subbase) is 195 mm,  Thickness of aggregate layer is 100 mm, Thickness of Dense Bitumen macadam (DBM) is 50 mm  Thickness of Bituminous concrete (BC) is 50 mm  Obtain by interpolating the thickness of CBR 5% and 10%.  The upper 100 mm of granular sub-base should be open graded so that its permeability is about 300 mm/day or higher for quick removal of water entering from surface.
  • 115. Calculation of Resilient Modulus (MR) and Modulus of Elasticity (E): 26/10/2016115  For traffic of 150 msa, Subgrade CBR 7%,  MR subgrade = 17.6 x CBR0.64 = 17.6 x 70.64 = 61.15 Mpa.  MR Bituminous layer = 3000 Mpa (From table 7.1 Resilienent Modulus of Bituminous Mixes, page 23, IRC: 37: 2012)  MR Aggregate = 450 Mpa and  E of cemented base is 5000 MPa,  E Granular subbase = MR subgrade x 0.20 x h0.45  Where, h = Thickness of GSB = 250 mm  = 61.15 x 0.20 x 2500.45 = 146.72 Mpa.
  • 116. Design check 26/10/2016116  To check the suitability of pavement design discussed above we carry out checks, which ensure safety against the failure of designed pavement.  The flexible pavement is checked for two types of failures i.e. Rutting in pavement and Fatigue in bottom layer of bituminous surfacing.  The following condition should be satisfied for the design to be satisfactory  Design strain < Allowable strain  Allowable strain = Obtained by fatigue model and rutting model  Design strain = IITpave software
  • 117. Design of Drainage layer 26/10/2016117  Design a granular drainage layer for a four lane heavy duty divided highway for an annual precipitation of 1200 mm. Longitudinal slope = 3 per cent, Camber = 2.5 percent.  Crack Infiltration Method
  • 118. Continue ...  Depth of drainage layer = 450 mm (WMM 250mm and Sub-base 200mm) By design.  Width of drainage layer : Calculate  AB = 8.5+1+2x0.45 = 10.4 m (1m unpave shoulder)  AC = 10.4 x(3/2) = 12.48 m.  AD = 16.24 m  (hypotenious of AB and AC)  Elevation drop :  Along AC: 12.48x3% = 0.374m  Along CD: 10.40x2.5% = 0.26m  Total drop = 0.634 26/10/2016118
  • 119. Continue ….  Hydraulic gradient = [Elevation drop/ length AD]  = [0.634/16.24] =0.039  Infiltration rate calculation:  qi = Ic [Nc/Wp + Wc / (Wp.Cs)]  Ic = 0.223 cub. m/day/meter  Nc = 3  Wp = 10.4 m  Wc = Wp,  Cs = 12 m  q = 0.083 Cub.meter/day/meter 26/10/2016119
  • 120. Continue.  Amount of water infiltrated (Q);  Q = 0.083 x 1 x 16.24 = 1.35 Cub.meter/ day.  Compare with  Q = KIA  A = Area of cress section = 1 x 0.1 = 0.1 sq.m  K = Coeff of permeability (Unknown)  I = Hydraulic gradient (0.039)  1.35 = K x 0.039 x 0.1  K = 346.62 m/day  This value of K is useful for deciding gradation. 26/10/2016120
  • 121. (Decide grade by using table) % Passing Sieve Opening, Mm Grading 1 Grading 2 Grading 3 Grading 4 Grading 5 Grading 6 20 100 100 100 100 100 100 12.5 85 84 83 81.5 79.5 75 9.5 77.5 76 74 72.5 69.5 63 4.76 58.3 56 52.5 49 43.5 32 2.36 42.5 39 34 29.5 22 5.8 2.00 39 35 30 25 17 0 0.84 26.5 22 15.5 9.8 0 0 0.42 18.2 13.3 6.3 0 0 0 0.25 13.0 7.5 0 0 0 0 0.10 6 0 0 0 0 0 0.075 0 0 0 0 0 0 Coeff. Of permeability m/day 3 35 100 350 850 950 26/10/2016121 Provide Grading 4 for K 346.62 m/day = 350m/day
  • 122. Recommendation 26/10/2016122  Specifications should be modified according to local condition. In wet climate wearing course should be impermeable.  long duration and low intensity rainfall causes more damage as compare with rainfall of small duration and more density.  If DBM and SDBC/BC are designed properly (4% air voids and protected shoulder) impermeably can be ensure.  Adequate provision for sub-surface drainage prevent pavement damage.
  • 123. Recommendations.  Thickness charts with BC/ SDBC are valid for all rainfall area.  For pavement carrying heavy traffic wearing course laid over WBM shows better performance.  For low traffic (upto 5 msa) bitumen surfacing with two coats is found to be suitable. 26/10/2016123
  • 124. Conclusion 26/10/2016124  Time to time revisions of code provision are needed keeping in view changes in traffic pattern and development of new technologies. Further with the gain of experience in the design as well as construction procedure of flexible pavement have demanded certain changes.  Hence by considering the above factors IRC: 37: 2012 includes some conceptual changes in the design of flexible pavement such as inclusion of Resilience moduli and consideration of strain in design.
  • 125. Conclusion . 26/10/2016125  This code also encourages the use IIT pave software which is newly recommended.  Since the use of semi-mechanistic approach, the design is not only based on the experience but it also gives parameters (strain parameter) to check the obtained design.  Solution to the above pavement design problem shows that the thickness design varies with the variation in various factors.
  • 126. References 26/10/2016126  [1] IRC: 37: 2012, “Guidelines for Design of Flexible pavement”, second revision.  [2] IRC: 37: 2001, “Tentative guidelines for Design of Flexible pavement”