The combustion process helps the engine to generate energy to drive the vehicle smoothly. But on the other hand, combustion process also causes the deposit of grim or dirt in the engine that lowers down the engine productivity day by day. The engine deposit gradually causes more serious problems like hesitation and stalling if they are left unattended in the first stage. Check the slides here to know the best ways to prevent deposit in the engine.

1. Best Ways To Prevent Deposit In
Engine

2. The combustion process helps the engine to generate
energy to drive the vehicle smoothly which provides a
trouble-free journey to the user.

3. But on the other hand, combustion process also causes the
deposit of grim or dirt in the engine that lowers down the
engine productivity day by day.

4. The engine deposit gradually causes more serious problems like
hesitation and stalling if they are left unattended in the first
stage.

5. Different Ways To Remove Engine Deposit :-

6. Removing engine deposit in general involves pouring additive to
the gas tank.

7. But the cleaning process is different for different areas
of engine .

8. The use of additive in engine can clean out areas like fuel injector,
intake valve, combustion chamber etc, and the other parts are
cleaned manually.

9. The manual cleaning deals with the deposits in throttle body
which can be removed by using a cleaning spray.

10. How Engine Deposits Are Formed?

11. As per Castrol Oil company, there are some top reasons that
helps to increase the engine deposit.

12. :- Long time idling with short trips prevents the oil from full
combustion.

13. :- The increase in the environmental contaminants in the
engine fasten the deposit.

14. :- Excess condensation which creates contaminants in the oil
with moisture.

15. :- If the engine oil is contaminated, then it can
distribute the contaminants throughout the
engine in the combustion process.

16. The deposit is comprised of partially burned fuel, metal
fragments or dirt from engine components etc.

17. Once the blockage established, the new
contaminants settle on the top rather
than flowing with oil and block the oil
flow.

18. What Are The Outcomes Of The Build Up And How
To Prevent It?

19. :- The deposit inside the injector can cause the engine to run
lean, lean misfire, rough idle, hesitation, poor fuel economy etc.

20. :- The injector build up is caused by frequent short trips, the
shorter the trip the faster the build up.

21. :- The continuous build up in throttle body reduces the air flow
inside the engine and that caused by fuel vapor.

22. :- The throttle build up can affect the idling quality and
smoothness of drive if not taken care in the first stage.

23. :- The deposit in intake valve can cause loss of energy and soak
the fuel spray instantly.

24. :- This build up disturbs the air-fuel ratio and cause lean fuel,
hesitation and decrease performance of the vehicle.

25. :- Deposit of debris in combustion chamber on the top of the
piston affects the compression ratio of engine and increases the
need of octane-rich fuel for vehicle.

26. :- Too much deposit can damage head gasket, piston rings and
road bearings if unattended in first stage of build up.