SlideShare a Scribd company logo
1 of 38
Download to read offline
8/31/2021 1
Hareesha N G, Asst. Prof, DSCE, BLore-78
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 2
BASIC CONCEPTS OF VIBRATION
• All bodies having mass and elasticity are capable of producing vibration.
• The mass is inherent of the body and elasticity causes relative motion
among its parts.
• When body particles are displaced by the application of external force, the
internal forces in the form of elastic energy are present in the body.
• These forces try to bring the body to its original position.
• At equilibrium position, the whole of the elastic energy is converted into
kinetic energy and body continues to move in the opposite direction
because of it.
• The whole of the kinetic energy is again converted into elastic or strain
energy due to which the body again returns to the equilibrium position.
• In this way, vibratory motion is repeated indefinitely and exchange of
energy takes place.
• Thus, any motion which repeats itself after an interval of time is called
vibration or oscillation.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 3
BASIC CONCEPTS OF VIBRATION (Cntd..)
• The swinging of simple pendulum as shown in figure 1 is an
example of vibration or oscillation as the motion of ball is to and fro
from its mean position repeatedly.
• The main reasons of vibration are as follows :
– Unbalanced centrifugal force in the system. This is caused because of non-
uniform material distribution in a rotating machine element.
– Elastic nature of the system.
– External excitation applied on the system.
– Winds may cause vibrations of certain systems such as electricity lines,
telephone lines, etc.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 4
IMPORTANCE OF VIBRATION STUDY IN
ENGINEERING
• The structures designed to support the high speed engines and turbines are
subjected to vibration.
• Due to faulty design and poor manufacture, there is unbalance in the
engines which causes excessive and unpleasant stresses in the rotating
system because of vibration.
• The vibration causes rapid wear of machine parts such as bearings and
gears.
• Unwanted vibrations may cause loosening of parts from the machine.
• Because of improper design or material distribution, the wheels of
locomotive can leave the track due to excessive vibration which results in
accident or heavy loss.
• Many buildings, structures and bridges fall because of vibration.
• If the frequency of excitation coincides with one of the natural frequencies
of the system, a condition of resonance is reached, and dangerously large
oscillations may occur which may result in the mechanical failure of the
system.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 5
IMPORTANCE OF VIBRATION STUDY IN
ENGINEERING (Contd…)
• Vibration can be used for useful purposes such as
vibration testing equipments, vibratory conveyors,
hoppers, sieves and compactors.
• Vibration is found very fruitful in mechanical workshops
such as in improving the efficiency of machining, casting,
forging and welding techniques, musical instruments and
earthquakes for geological research.
• It is useful for the propagation of sound.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 6
IMPORTANCE OF VIBRATION STUDY IN
ENGINEERING (Contd…)
Thus undesirable vibrations should be eliminated or reduced
upto certain extent by the following methods :
– Removing external excitation, if possible
– Using shock absorbers.
– Dynamic absorbers.
– Resting the system on proper vibration isolators.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 7
DEFINITIONS
• Periodic motion: A motion which repeats itself after equal intervals of time.
• Time period: Time taken to complete one cycle.
• Frequency: Number of cycles per unit time.
• Amplitude: The maximum displacement of a vibrating body from its equilibrium
position.
• Natural frequency: When no external force acting on the system after giving it
an initial displacement, the body vibrates. These vibrations are called free
vibrations and their frequency as natural frequency. It is expressed in rad/sec or
Hertz.
• Fundamental Mode of Vibration: The fundamental mode of vibration of a
system is the mode having the lowest natural frequency.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 8
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 9
SHM Demonstration
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 10
DEFINITIONS (Contd..)
Simple Harmonic Motion:
• The motion of a body to and fro about a fixed point is called simple
harmonic motion.
• The motion is periodic .
• The motion of a simple pendulum is simple harmonic in nature.
• A body having simple harmonic motion is represented by the
equation
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 11
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 12
x Asin( ) A sin( t )
 
 
2
2 2
2
dx
A cos( t )
dt
and
d x
A sin( t ) x
dt
 
  

   
DEFINITIONS (Contd..)
Damping:
– It is the resistance to the motion of a vibrating body.
– The vibrations associated with this resistance are known as damped
vibrations.
Phase difference:
– Suppose there are two vectors x1 and x2 having frequencies ω rad/sec, each
The vibrating motions can be expressed as
x1=A1.sin (ωt)
x2=A2.sin (ωt+φ)
– In the above equation the term φ is known an the phase difference.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 13
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 14
DEFINITIONS (Contd..)
Resonance:
– When the frequency of external excitation is equal to the natural
frequency of a vibrating body, the amplitude of vibration
becomes excessively large.
– This concept is known as resonance.
Mechanical systems:
– The systems consisting of mass, stiffness and damping are
known as mechanical systems.
Continuous and Discrete Systems:
– Most of the mechanical systems include elastic members which
have infinite number of degree of freedom.
– Such systems are called continuous systems.
– Continuous systems are also known as distributed systems.
– Cantilever, simply supported beam etc. are the examples of such
systems.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 15
DEGREE OF FREEDOM:
• The minimum number of independent coordinates required to specify the
motion of a system at any instant is known as degrees of freedom of the
system.
• In general, it is equal to the number of independent displacements that are
possible.
• This number varies from zero to infinity.
• The one, two and three degrees of freedom systems are shown in figure 2.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 16
In single degree of freedom there is only one
independent coordinate x1 to specify the
configuration as shown in figure (a). Similarly,
there are two (x1, x2). and three coordinates (x1,
x2 and x3) for two and three degrees of freedom
systems as shown in figure (b) and (c)
PARTS OF A VIBRATING SYSTEM
• A vibratory system basically consists of three elements, namely the mass,
the spring and damper.
• In a vibrating body, there is exchange of energy from one form to another.
• Energy is stored by mass in the form of kinetic energy (1/2 mv2), in the
spring in the form of potential energy (1/2 kx ) and dissipated in the
damper in the form of heat energy which opposes the motion of the
system.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 17
2 3
1
1. Inertia (stores kinetic energy) –Mass (m)
2. Elasticity (stores potential energy) – Spring
(k)
3. Energy Dissipation- Damper (C)
PARTS OF A VIBRATING SYSTEM
• Energy enters the system with the application of external force known as
excitation.
• The excitation disturbs the mass from its mean position and the mass goes
up and down from the mean position.
• The kinetic energy is converted into potential energy and potential energy
into kinetic energy. This sequence goes on repeating and the system
continues to vibrate.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 18
PARTS OF A VIBRATING SYSTEM (contd..)
• At the same time damping force (cv) acts on the mass and opposes
its motion. Thus some energy is dissipated in each cycle of
vibration due to damping.
• The free vibrations die out and the system remains at its static
equilibrium position.
• A basic vibratory system is shown in figure .
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 19
F = cv
Velocity
Displacement Acceleration
x
v a
k
c
m
m
F = kx F = ma
Mechanical Parameters and Components
TYPES OF VIBRATION
Some of the important types of vibration are as follows
1) Free and Forced Vibration
• After disturbing the system, the external excitation is removed. then the
system vibrates on its own. This type of vibration is known as free
vibration.
– Simple pendulum is one of the examples.
• The vibration which is under the influence of external force is called
forced vibration.
– Machine tools, electric bells etc. are the suitable examples.
2) Linear and Non-linear Vibration
• In a system., if mass, spring and damper behave in a linear manner, the
vibrations caused are known as linear in nature.
– Linear vibrations are governed by linear differential equations.
– They follow the law of superposition.
• On the other hand, if any of the basic components of a vibratory system
behaves non-linearly, the vibration is called non-linear.
– Linear vibration becomes, non-linear for very large amplitude of vibration.
– It does not follow the law of superposition.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 21
TYPES OF VIBRATION (Contd..)
3) Damped and Un-damped Vibration
• If the vibratory system has a damper, the motion of the system will
be opposed by it and the energy of the system will be dissipated in
friction.
• This type of vibration is called damped vibration.
• On the contrary, the system having no damper is known as un-
damped vibration.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 22
n
2

d
2

Overdamped ( 1)
 
Underdamped ( 1)
 
Underdamped ( 0 )
 
Critically
damped ( 1)
 
TYPES OF VIBRATION (Contd..)
4) Deterministic and Random Vibration
• If in the vibratory system, the amount of external excitation is
known in magnitude, it causes deterministic vibration.
• Contrary to it, the non-deterministic vibrations are known as
random vibrations.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 23
TYPES OF VIBRATION (Contd..)
5) Longitudinal, Transverse and Torsional Vibrations
• Figure represents a body of mass m carried on one end of a weightless spindle,
the other end being fixed. If the mass m moves up and down parallel to the
spindle axis, it is said to execute longitudinal vibrations as shown in figure (a).
• When the particles of the body or shaft move approximately perpendicular to the
axis of the shaft, as shown in figure (b), the vibration so caused are known as
transverse.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 24
If the spindle gets alternately
twisted and untwisted on account
of vibratory motion of the
suspended disc, it is called to be
undergoing torsional vibrations
as shown in figure (c).
TYPES OF VIBRATION (Contd..)
6) Transient Vibration
• In ideal systems the free vibrations continue indefinitely as there is
no damping.
• The amplitude of vibration decays continuously because of
damping (in a real system) and vanishes ultimately.
• Such vibration in a real system is called transient vibration.
• Systems with finite number of degrees of freedom are called
discrete or lumped systems.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 25
SIMPLE HARMONIC MOTION:
• The motion of a body to and fro about a fixed point is called simple
harmonic motion.
• The motion is periodic .
• The motion of a simple pendulum is simple harmonic in nature.
• A body having simple harmonic motion is represented by the
equation
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 26
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 27
SIMPLE HARMONIC MOTION:
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 28
x Asin( ) A sin( t )
 
 
2
2 2
2
dx
A cos( t )
dt
and
d x
A sin( t ) x
dt
 
  

   
SIMPLE HARMONIC MOTION:
PHENOMENON OF BEATS
• When two harmonic motions pass through some point in a medium
simultaneously, the resultant displacement at that point is the vector
sum of the displacement due to two component motions.
• This superposition of motion is called interference.
• The phenomenon of beat occurs as a result of interference between
two waves of slightly different frequencies moving along the same
straight line in the same direction.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 29
http://historicaltuning.co
m/BeatsVideo.mp4
PHENOMENON OF BEATS (contd…)
• Consider that at particular time, the two wave motions are in the
same phase.
• At this stage the resultant amplitude of vibration will be maximum.
• On the other hand, when the two motions are not in phase with each
other, they produce minimum amplitude of vibration.
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 30
Again after some time the two
motions are in phase and produce
maximum amplitude and then
minimum amplitude.
This process goes on repeating and
the resultant amplitude
continuously keeps on changing
from maximum to minimum. This
phenomenon is known as beat.
https://www.youtube.com/
watch?v=5hxQDAmdNWE
MATLAB Program for solving Harmonic analysis
Problems
clc
clear all
syms t
w=20*pi;
n=1:6;
x1(t)=20*t;
x2(t)=-20*t+2;
x(t)=x1(t)+x2(t);
a0=20*(int(x1(t),t,0,0.05)+int(x2(t),t,0.05,0.1))
an=20*(int((x1(t)*cos(w*n*t)),t,0,0.05)+(int((x2(t)*cos(w*n*t)),t,
0.05,0.10)))
bn=20*(int((x1(t)*sin(w*n*t)),t,0,0.05)+(int((x2(t)*sin(w*n*t)),t,
0.05,0.10)))
% a0/2 =1
% an =[ -4/pi^2, 0, -4/(9*pi^2), 0, -4/(25*pi^2), 0]
%bn =[ 0, 0, 0, 0, 0, 0]
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 31
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 32
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 33
%%
% Problem number-2
clc
clear all
syms t
w=10*pi;
n=1:6;
x1(t)=-20*t+2; % 0<t<0.2
a0=20*(int(x1(t),t,0,0.2))
an=10*(int((x1(t)*cos(w*n*t)),t,0,0.2))
bn=10*(int((x1(t)*sin(w*n*t)),t,0,0.2))
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 34
%%
% Problem number-3
clc
clear all
syms t
w=100*pi;
n=1:6;
x1(t)=abs(sin(100*pi*t));
a0=50*(int(x1(t),t,0,0.02))
an=100*(int((x1(t)*cos(w*n*t)),t,0,0.02))
bn=100*(int((x1(t)*sin(w*n*t)),t,0,0.02))
% This is the solution
% a0 = 2/pi
% an = [ 0, -4/(3*pi), 0, -4/(15*pi), 0, -4/(35*pi)]
% an= -4/[(n^2-1)*pi] for even vlaues of n an=0 for odd
values of n.
% bn = [ 0, 0, 0, 0, 0, 0]
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 35
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 36
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 37
8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 38

More Related Content

What's hot

Equilibrium, Energy and Rayleigh’s Method
Equilibrium, Energy and Rayleigh’s Method   Equilibrium, Energy and Rayleigh’s Method
Equilibrium, Energy and Rayleigh’s Method Parthivpal17
 
Vibration Isolation and Base Excitation
Vibration Isolation and Base ExcitationVibration Isolation and Base Excitation
Vibration Isolation and Base ExcitationHimanshi Gupta
 
Vibration dampers
Vibration dampersVibration dampers
Vibration dampersSGGDGD
 
Dynamics of Machine - Unit III-Transverse Vibration
Dynamics of Machine - Unit III-Transverse VibrationDynamics of Machine - Unit III-Transverse Vibration
Dynamics of Machine - Unit III-Transverse VibrationDr.S.SURESH
 
single degree of freedom systems forced vibrations
single degree of freedom systems forced vibrations single degree of freedom systems forced vibrations
single degree of freedom systems forced vibrations KESHAV
 
Single degree freedom free vibration
Single degree freedom free vibrationSingle degree freedom free vibration
Single degree freedom free vibrationDr.Vikas Deulgaonkar
 
Undamped Free Vibration
Undamped Free VibrationUndamped Free Vibration
Undamped Free VibrationUrvish Patel
 
Limit Gauges
Limit GaugesLimit Gauges
Limit Gaugestaruian
 
air standard, fuel air and actual cycles
air standard, fuel air and actual cyclesair standard, fuel air and actual cycles
air standard, fuel air and actual cyclesmp poonia
 
Dynamics of Machines - Unit III-Torsional Vibration
Dynamics of Machines -  Unit III-Torsional VibrationDynamics of Machines -  Unit III-Torsional Vibration
Dynamics of Machines - Unit III-Torsional VibrationDr.S.SURESH
 

What's hot (20)

Equilibrium, Energy and Rayleigh’s Method
Equilibrium, Energy and Rayleigh’s Method   Equilibrium, Energy and Rayleigh’s Method
Equilibrium, Energy and Rayleigh’s Method
 
Static Force Analysis
Static Force AnalysisStatic Force Analysis
Static Force Analysis
 
Dynamics of machines-3
Dynamics of machines-3Dynamics of machines-3
Dynamics of machines-3
 
Whirling of shaft
Whirling of shaftWhirling of shaft
Whirling of shaft
 
Vibration Isolation and Base Excitation
Vibration Isolation and Base ExcitationVibration Isolation and Base Excitation
Vibration Isolation and Base Excitation
 
Vibration measuring instruments
Vibration measuring instrumentsVibration measuring instruments
Vibration measuring instruments
 
Unit 3 Free vibration
Unit 3 Free vibrationUnit 3 Free vibration
Unit 3 Free vibration
 
DYNAMICS OF MACHINES UNIT -3&4 BY Mr.P.RAMACHANDRAN/AP/MECH/KIT/CBE
DYNAMICS OF MACHINES UNIT -3&4 BY Mr.P.RAMACHANDRAN/AP/MECH/KIT/CBEDYNAMICS OF MACHINES UNIT -3&4 BY Mr.P.RAMACHANDRAN/AP/MECH/KIT/CBE
DYNAMICS OF MACHINES UNIT -3&4 BY Mr.P.RAMACHANDRAN/AP/MECH/KIT/CBE
 
Dynamics of Machinery Unit IV
Dynamics of Machinery Unit IVDynamics of Machinery Unit IV
Dynamics of Machinery Unit IV
 
Vibration
VibrationVibration
Vibration
 
Vibration dampers
Vibration dampersVibration dampers
Vibration dampers
 
DYNAMICS OF MACHINES UNIT-1 BY Mr.P.RAMACHANDRAN/AP/MECH/KIT/CBE
DYNAMICS OF MACHINES UNIT-1 BY Mr.P.RAMACHANDRAN/AP/MECH/KIT/CBEDYNAMICS OF MACHINES UNIT-1 BY Mr.P.RAMACHANDRAN/AP/MECH/KIT/CBE
DYNAMICS OF MACHINES UNIT-1 BY Mr.P.RAMACHANDRAN/AP/MECH/KIT/CBE
 
Vibration
VibrationVibration
Vibration
 
Dynamics of Machine - Unit III-Transverse Vibration
Dynamics of Machine - Unit III-Transverse VibrationDynamics of Machine - Unit III-Transverse Vibration
Dynamics of Machine - Unit III-Transverse Vibration
 
single degree of freedom systems forced vibrations
single degree of freedom systems forced vibrations single degree of freedom systems forced vibrations
single degree of freedom systems forced vibrations
 
Single degree freedom free vibration
Single degree freedom free vibrationSingle degree freedom free vibration
Single degree freedom free vibration
 
Undamped Free Vibration
Undamped Free VibrationUndamped Free Vibration
Undamped Free Vibration
 
Limit Gauges
Limit GaugesLimit Gauges
Limit Gauges
 
air standard, fuel air and actual cycles
air standard, fuel air and actual cyclesair standard, fuel air and actual cycles
air standard, fuel air and actual cycles
 
Dynamics of Machines - Unit III-Torsional Vibration
Dynamics of Machines -  Unit III-Torsional VibrationDynamics of Machines -  Unit III-Torsional Vibration
Dynamics of Machines - Unit III-Torsional Vibration
 

Similar to Mechanical Vibration- An introduction

Ch 01, Introduction to Mechanical Vibrations ppt.pdf
Ch 01, Introduction to Mechanical Vibrations ppt.pdfCh 01, Introduction to Mechanical Vibrations ppt.pdf
Ch 01, Introduction to Mechanical Vibrations ppt.pdfAtalelewZeru
 
1- Mechanical Vibration.pptx
1- Mechanical Vibration.pptx1- Mechanical Vibration.pptx
1- Mechanical Vibration.pptxhdAhraf
 
1 Mechanical Vibrations07 March.pdf
1 Mechanical Vibrations07 March.pdf1 Mechanical Vibrations07 March.pdf
1 Mechanical Vibrations07 March.pdfEinoNekongo
 
Vibrations_DOM.pptx
Vibrations_DOM.pptxVibrations_DOM.pptx
Vibrations_DOM.pptxKhaireSushom
 
Mechanical vibration note
Mechanical vibration note Mechanical vibration note
Mechanical vibration note Mohammed Imran
 
Intro to mechanical vibrations
Intro to mechanical vibrationsIntro to mechanical vibrations
Intro to mechanical vibrationsFizah Amer
 
1-intro to vibration 1.pptx
1-intro to vibration 1.pptx1-intro to vibration 1.pptx
1-intro to vibration 1.pptxhaziq100
 
Introduction to mechanical vibration
Introduction to mechanical vibrationIntroduction to mechanical vibration
Introduction to mechanical vibrationDinesh Panchal
 
Fundamentals of vibration
Fundamentals of vibrationFundamentals of vibration
Fundamentals of vibrationAshish Gupta
 
Ae6602 vibrations &amp; elments of aeroelasticity 2 marks
Ae6602  vibrations &amp; elments of aeroelasticity  2 marksAe6602  vibrations &amp; elments of aeroelasticity  2 marks
Ae6602 vibrations &amp; elments of aeroelasticity 2 marksshanmuganathanm3
 
A Review of Design of Shock Absorber Test Rig
A Review of Design of Shock Absorber Test RigA Review of Design of Shock Absorber Test Rig
A Review of Design of Shock Absorber Test RigIRJET Journal
 
160123119012 2161901
160123119012 2161901160123119012 2161901
160123119012 2161901Pavan Gupta
 

Similar to Mechanical Vibration- An introduction (20)

Ch 01, Introduction to Mechanical Vibrations ppt.pdf
Ch 01, Introduction to Mechanical Vibrations ppt.pdfCh 01, Introduction to Mechanical Vibrations ppt.pdf
Ch 01, Introduction to Mechanical Vibrations ppt.pdf
 
TOM UNIT-V Vibrations.pptx
TOM UNIT-V Vibrations.pptxTOM UNIT-V Vibrations.pptx
TOM UNIT-V Vibrations.pptx
 
1- Mechanical Vibration.pptx
1- Mechanical Vibration.pptx1- Mechanical Vibration.pptx
1- Mechanical Vibration.pptx
 
1 Mechanical Vibrations07 March.pdf
1 Mechanical Vibrations07 March.pdf1 Mechanical Vibrations07 March.pdf
1 Mechanical Vibrations07 March.pdf
 
Vibrations_DOM.pptx
Vibrations_DOM.pptxVibrations_DOM.pptx
Vibrations_DOM.pptx
 
Mechanical vibration note
Mechanical vibration note Mechanical vibration note
Mechanical vibration note
 
Introduction in mechanical vibration
Introduction in mechanical vibrationIntroduction in mechanical vibration
Introduction in mechanical vibration
 
Intro to mechanical vibrations
Intro to mechanical vibrationsIntro to mechanical vibrations
Intro to mechanical vibrations
 
Vibration.pdf
Vibration.pdfVibration.pdf
Vibration.pdf
 
1-intro to vibration 1.pptx
1-intro to vibration 1.pptx1-intro to vibration 1.pptx
1-intro to vibration 1.pptx
 
Introduction to mechanical vibration
Introduction to mechanical vibrationIntroduction to mechanical vibration
Introduction to mechanical vibration
 
Vibration analysis
Vibration analysisVibration analysis
Vibration analysis
 
Unit-1_Theory of vibrations.pdf
Unit-1_Theory of vibrations.pdfUnit-1_Theory of vibrations.pdf
Unit-1_Theory of vibrations.pdf
 
Fundamentals of vibration
Fundamentals of vibrationFundamentals of vibration
Fundamentals of vibration
 
Ae6602 vibrations &amp; elments of aeroelasticity 2 marks
Ae6602  vibrations &amp; elments of aeroelasticity  2 marksAe6602  vibrations &amp; elments of aeroelasticity  2 marks
Ae6602 vibrations &amp; elments of aeroelasticity 2 marks
 
Vibration
VibrationVibration
Vibration
 
Dynamics of Machinery Unit III
Dynamics of Machinery Unit IIIDynamics of Machinery Unit III
Dynamics of Machinery Unit III
 
Introduction to Mechanical Vibration.pptx
Introduction to Mechanical Vibration.pptxIntroduction to Mechanical Vibration.pptx
Introduction to Mechanical Vibration.pptx
 
A Review of Design of Shock Absorber Test Rig
A Review of Design of Shock Absorber Test RigA Review of Design of Shock Absorber Test Rig
A Review of Design of Shock Absorber Test Rig
 
160123119012 2161901
160123119012 2161901160123119012 2161901
160123119012 2161901
 

More from Hareesha N Gowda, Dayananda Sagar College of Engg, Bangalore

More from Hareesha N Gowda, Dayananda Sagar College of Engg, Bangalore (20)

Alumni Meet Invitation.pdf
Alumni Meet Invitation.pdfAlumni Meet Invitation.pdf
Alumni Meet Invitation.pdf
 
Brammadevarahalli GP Panchapayana
Brammadevarahalli GP PanchapayanaBrammadevarahalli GP Panchapayana
Brammadevarahalli GP Panchapayana
 
Introduction to control systems
Introduction to control systemsIntroduction to control systems
Introduction to control systems
 
Be project report template
Be project report templateBe project report template
Be project report template
 
Computer aided machine drawing manual
Computer aided machine drawing manualComputer aided machine drawing manual
Computer aided machine drawing manual
 
Unit 1- simple stress and strain
Unit 1- simple stress and strainUnit 1- simple stress and strain
Unit 1- simple stress and strain
 
Unit 8: Torsion of circular shafts and elastic stability of columns
Unit 8: Torsion of circular shafts and elastic stability of columnsUnit 8: Torsion of circular shafts and elastic stability of columns
Unit 8: Torsion of circular shafts and elastic stability of columns
 
Unit 6: Bending and shear Stresses in beams
Unit 6: Bending and shear Stresses in beamsUnit 6: Bending and shear Stresses in beams
Unit 6: Bending and shear Stresses in beams
 
Unit 5 shear force and bending moment in beams
Unit 5  shear force and bending moment in beamsUnit 5  shear force and bending moment in beams
Unit 5 shear force and bending moment in beams
 
Unit 3 Compound stresses
Unit 3  Compound stressesUnit 3  Compound stresses
Unit 3 Compound stresses
 
Unit 2 stresses in composite sections
Unit 2  stresses in composite sectionsUnit 2  stresses in composite sections
Unit 2 stresses in composite sections
 
Dynamics of Machines: Question bank unitwise from vtu old question papers
Dynamics of Machines: Question bank unitwise from vtu old question papersDynamics of Machines: Question bank unitwise from vtu old question papers
Dynamics of Machines: Question bank unitwise from vtu old question papers
 
Mechanics of Materials: Question Bank from old VTU Question papers
Mechanics of Materials: Question Bank from old VTU Question papersMechanics of Materials: Question Bank from old VTU Question papers
Mechanics of Materials: Question Bank from old VTU Question papers
 
Robots: state of-the-art and future trends
Robots: state of-the-art and future trendsRobots: state of-the-art and future trends
Robots: state of-the-art and future trends
 
Screw thread measurements and Gear measurement
Screw thread measurements and Gear measurementScrew thread measurements and Gear measurement
Screw thread measurements and Gear measurement
 
Force, Pressure and Torque measurements
Force, Pressure and Torque measurementsForce, Pressure and Torque measurements
Force, Pressure and Torque measurements
 
Mechanical measurements and Measurement systems
Mechanical measurements and Measurement systemsMechanical measurements and Measurement systems
Mechanical measurements and Measurement systems
 
CIM and automation laboratory manual
CIM and automation laboratory manualCIM and automation laboratory manual
CIM and automation laboratory manual
 
Introduction to Non-Traditional Machining
Introduction to Non-Traditional MachiningIntroduction to Non-Traditional Machining
Introduction to Non-Traditional Machining
 
Chemical machining
Chemical machiningChemical machining
Chemical machining
 

Recently uploaded

Patterns of Written Texts Across Disciplines.pptx
Patterns of Written Texts Across Disciplines.pptxPatterns of Written Texts Across Disciplines.pptx
Patterns of Written Texts Across Disciplines.pptxMYDA ANGELICA SUAN
 
5 charts on South Africa as a source country for international student recrui...
5 charts on South Africa as a source country for international student recrui...5 charts on South Africa as a source country for international student recrui...
5 charts on South Africa as a source country for international student recrui...CaraSkikne1
 
Maximizing Impact_ Nonprofit Website Planning, Budgeting, and Design.pdf
Maximizing Impact_ Nonprofit Website Planning, Budgeting, and Design.pdfMaximizing Impact_ Nonprofit Website Planning, Budgeting, and Design.pdf
Maximizing Impact_ Nonprofit Website Planning, Budgeting, and Design.pdfTechSoup
 
Presentation on the Basics of Writing. Writing a Paragraph
Presentation on the Basics of Writing. Writing a ParagraphPresentation on the Basics of Writing. Writing a Paragraph
Presentation on the Basics of Writing. Writing a ParagraphNetziValdelomar1
 
How to Use api.constrains ( ) in Odoo 17
How to Use api.constrains ( ) in Odoo 17How to Use api.constrains ( ) in Odoo 17
How to Use api.constrains ( ) in Odoo 17Celine George
 
How to Add a New Field in Existing Kanban View in Odoo 17
How to Add a New Field in Existing Kanban View in Odoo 17How to Add a New Field in Existing Kanban View in Odoo 17
How to Add a New Field in Existing Kanban View in Odoo 17Celine George
 
General views of Histopathology and step
General views of Histopathology and stepGeneral views of Histopathology and step
General views of Histopathology and stepobaje godwin sunday
 
Benefits & Challenges of Inclusive Education
Benefits & Challenges of Inclusive EducationBenefits & Challenges of Inclusive Education
Benefits & Challenges of Inclusive EducationMJDuyan
 
Patient Counselling. Definition of patient counseling; steps involved in pati...
Patient Counselling. Definition of patient counseling; steps involved in pati...Patient Counselling. Definition of patient counseling; steps involved in pati...
Patient Counselling. Definition of patient counseling; steps involved in pati...raviapr7
 
What is the Future of QuickBooks DeskTop?
What is the Future of QuickBooks DeskTop?What is the Future of QuickBooks DeskTop?
What is the Future of QuickBooks DeskTop?TechSoup
 
Practical Research 1 Lesson 9 Scope and delimitation.pptx
Practical Research 1 Lesson 9 Scope and delimitation.pptxPractical Research 1 Lesson 9 Scope and delimitation.pptx
Practical Research 1 Lesson 9 Scope and delimitation.pptxKatherine Villaluna
 
Diploma in Nursing Admission Test Question Solution 2023.pdf
Diploma in Nursing Admission Test Question Solution 2023.pdfDiploma in Nursing Admission Test Question Solution 2023.pdf
Diploma in Nursing Admission Test Question Solution 2023.pdfMohonDas
 
UKCGE Parental Leave Discussion March 2024
UKCGE Parental Leave Discussion March 2024UKCGE Parental Leave Discussion March 2024
UKCGE Parental Leave Discussion March 2024UKCGE
 
HED Office Sohayok Exam Question Solution 2023.pdf
HED Office Sohayok Exam Question Solution 2023.pdfHED Office Sohayok Exam Question Solution 2023.pdf
HED Office Sohayok Exam Question Solution 2023.pdfMohonDas
 
Education and training program in the hospital APR.pptx
Education and training program in the hospital APR.pptxEducation and training program in the hospital APR.pptx
Education and training program in the hospital APR.pptxraviapr7
 
How to Make a Field read-only in Odoo 17
How to Make a Field read-only in Odoo 17How to Make a Field read-only in Odoo 17
How to Make a Field read-only in Odoo 17Celine George
 
In - Vivo and In - Vitro Correlation.pptx
In - Vivo and In - Vitro Correlation.pptxIn - Vivo and In - Vitro Correlation.pptx
In - Vivo and In - Vitro Correlation.pptxAditiChauhan701637
 
3.21.24 The Origins of Black Power.pptx
3.21.24  The Origins of Black Power.pptx3.21.24  The Origins of Black Power.pptx
3.21.24 The Origins of Black Power.pptxmary850239
 
Quality Assurance_GOOD LABORATORY PRACTICE
Quality Assurance_GOOD LABORATORY PRACTICEQuality Assurance_GOOD LABORATORY PRACTICE
Quality Assurance_GOOD LABORATORY PRACTICESayali Powar
 

Recently uploaded (20)

Patterns of Written Texts Across Disciplines.pptx
Patterns of Written Texts Across Disciplines.pptxPatterns of Written Texts Across Disciplines.pptx
Patterns of Written Texts Across Disciplines.pptx
 
5 charts on South Africa as a source country for international student recrui...
5 charts on South Africa as a source country for international student recrui...5 charts on South Africa as a source country for international student recrui...
5 charts on South Africa as a source country for international student recrui...
 
Maximizing Impact_ Nonprofit Website Planning, Budgeting, and Design.pdf
Maximizing Impact_ Nonprofit Website Planning, Budgeting, and Design.pdfMaximizing Impact_ Nonprofit Website Planning, Budgeting, and Design.pdf
Maximizing Impact_ Nonprofit Website Planning, Budgeting, and Design.pdf
 
Personal Resilience in Project Management 2 - TV Edit 1a.pdf
Personal Resilience in Project Management 2 - TV Edit 1a.pdfPersonal Resilience in Project Management 2 - TV Edit 1a.pdf
Personal Resilience in Project Management 2 - TV Edit 1a.pdf
 
Presentation on the Basics of Writing. Writing a Paragraph
Presentation on the Basics of Writing. Writing a ParagraphPresentation on the Basics of Writing. Writing a Paragraph
Presentation on the Basics of Writing. Writing a Paragraph
 
How to Use api.constrains ( ) in Odoo 17
How to Use api.constrains ( ) in Odoo 17How to Use api.constrains ( ) in Odoo 17
How to Use api.constrains ( ) in Odoo 17
 
How to Add a New Field in Existing Kanban View in Odoo 17
How to Add a New Field in Existing Kanban View in Odoo 17How to Add a New Field in Existing Kanban View in Odoo 17
How to Add a New Field in Existing Kanban View in Odoo 17
 
General views of Histopathology and step
General views of Histopathology and stepGeneral views of Histopathology and step
General views of Histopathology and step
 
Benefits & Challenges of Inclusive Education
Benefits & Challenges of Inclusive EducationBenefits & Challenges of Inclusive Education
Benefits & Challenges of Inclusive Education
 
Patient Counselling. Definition of patient counseling; steps involved in pati...
Patient Counselling. Definition of patient counseling; steps involved in pati...Patient Counselling. Definition of patient counseling; steps involved in pati...
Patient Counselling. Definition of patient counseling; steps involved in pati...
 
What is the Future of QuickBooks DeskTop?
What is the Future of QuickBooks DeskTop?What is the Future of QuickBooks DeskTop?
What is the Future of QuickBooks DeskTop?
 
Practical Research 1 Lesson 9 Scope and delimitation.pptx
Practical Research 1 Lesson 9 Scope and delimitation.pptxPractical Research 1 Lesson 9 Scope and delimitation.pptx
Practical Research 1 Lesson 9 Scope and delimitation.pptx
 
Diploma in Nursing Admission Test Question Solution 2023.pdf
Diploma in Nursing Admission Test Question Solution 2023.pdfDiploma in Nursing Admission Test Question Solution 2023.pdf
Diploma in Nursing Admission Test Question Solution 2023.pdf
 
UKCGE Parental Leave Discussion March 2024
UKCGE Parental Leave Discussion March 2024UKCGE Parental Leave Discussion March 2024
UKCGE Parental Leave Discussion March 2024
 
HED Office Sohayok Exam Question Solution 2023.pdf
HED Office Sohayok Exam Question Solution 2023.pdfHED Office Sohayok Exam Question Solution 2023.pdf
HED Office Sohayok Exam Question Solution 2023.pdf
 
Education and training program in the hospital APR.pptx
Education and training program in the hospital APR.pptxEducation and training program in the hospital APR.pptx
Education and training program in the hospital APR.pptx
 
How to Make a Field read-only in Odoo 17
How to Make a Field read-only in Odoo 17How to Make a Field read-only in Odoo 17
How to Make a Field read-only in Odoo 17
 
In - Vivo and In - Vitro Correlation.pptx
In - Vivo and In - Vitro Correlation.pptxIn - Vivo and In - Vitro Correlation.pptx
In - Vivo and In - Vitro Correlation.pptx
 
3.21.24 The Origins of Black Power.pptx
3.21.24  The Origins of Black Power.pptx3.21.24  The Origins of Black Power.pptx
3.21.24 The Origins of Black Power.pptx
 
Quality Assurance_GOOD LABORATORY PRACTICE
Quality Assurance_GOOD LABORATORY PRACTICEQuality Assurance_GOOD LABORATORY PRACTICE
Quality Assurance_GOOD LABORATORY PRACTICE
 

Mechanical Vibration- An introduction

  • 1. 8/31/2021 1 Hareesha N G, Asst. Prof, DSCE, BLore-78
  • 2. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 2
  • 3. BASIC CONCEPTS OF VIBRATION • All bodies having mass and elasticity are capable of producing vibration. • The mass is inherent of the body and elasticity causes relative motion among its parts. • When body particles are displaced by the application of external force, the internal forces in the form of elastic energy are present in the body. • These forces try to bring the body to its original position. • At equilibrium position, the whole of the elastic energy is converted into kinetic energy and body continues to move in the opposite direction because of it. • The whole of the kinetic energy is again converted into elastic or strain energy due to which the body again returns to the equilibrium position. • In this way, vibratory motion is repeated indefinitely and exchange of energy takes place. • Thus, any motion which repeats itself after an interval of time is called vibration or oscillation. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 3
  • 4. BASIC CONCEPTS OF VIBRATION (Cntd..) • The swinging of simple pendulum as shown in figure 1 is an example of vibration or oscillation as the motion of ball is to and fro from its mean position repeatedly. • The main reasons of vibration are as follows : – Unbalanced centrifugal force in the system. This is caused because of non- uniform material distribution in a rotating machine element. – Elastic nature of the system. – External excitation applied on the system. – Winds may cause vibrations of certain systems such as electricity lines, telephone lines, etc. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 4
  • 5. IMPORTANCE OF VIBRATION STUDY IN ENGINEERING • The structures designed to support the high speed engines and turbines are subjected to vibration. • Due to faulty design and poor manufacture, there is unbalance in the engines which causes excessive and unpleasant stresses in the rotating system because of vibration. • The vibration causes rapid wear of machine parts such as bearings and gears. • Unwanted vibrations may cause loosening of parts from the machine. • Because of improper design or material distribution, the wheels of locomotive can leave the track due to excessive vibration which results in accident or heavy loss. • Many buildings, structures and bridges fall because of vibration. • If the frequency of excitation coincides with one of the natural frequencies of the system, a condition of resonance is reached, and dangerously large oscillations may occur which may result in the mechanical failure of the system. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 5
  • 6. IMPORTANCE OF VIBRATION STUDY IN ENGINEERING (Contd…) • Vibration can be used for useful purposes such as vibration testing equipments, vibratory conveyors, hoppers, sieves and compactors. • Vibration is found very fruitful in mechanical workshops such as in improving the efficiency of machining, casting, forging and welding techniques, musical instruments and earthquakes for geological research. • It is useful for the propagation of sound. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 6
  • 7. IMPORTANCE OF VIBRATION STUDY IN ENGINEERING (Contd…) Thus undesirable vibrations should be eliminated or reduced upto certain extent by the following methods : – Removing external excitation, if possible – Using shock absorbers. – Dynamic absorbers. – Resting the system on proper vibration isolators. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 7
  • 8. DEFINITIONS • Periodic motion: A motion which repeats itself after equal intervals of time. • Time period: Time taken to complete one cycle. • Frequency: Number of cycles per unit time. • Amplitude: The maximum displacement of a vibrating body from its equilibrium position. • Natural frequency: When no external force acting on the system after giving it an initial displacement, the body vibrates. These vibrations are called free vibrations and their frequency as natural frequency. It is expressed in rad/sec or Hertz. • Fundamental Mode of Vibration: The fundamental mode of vibration of a system is the mode having the lowest natural frequency. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 8
  • 9. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 9
  • 10. SHM Demonstration 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 10
  • 11. DEFINITIONS (Contd..) Simple Harmonic Motion: • The motion of a body to and fro about a fixed point is called simple harmonic motion. • The motion is periodic . • The motion of a simple pendulum is simple harmonic in nature. • A body having simple harmonic motion is represented by the equation 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 11
  • 12. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 12 x Asin( ) A sin( t )     2 2 2 2 dx A cos( t ) dt and d x A sin( t ) x dt          
  • 13. DEFINITIONS (Contd..) Damping: – It is the resistance to the motion of a vibrating body. – The vibrations associated with this resistance are known as damped vibrations. Phase difference: – Suppose there are two vectors x1 and x2 having frequencies ω rad/sec, each The vibrating motions can be expressed as x1=A1.sin (ωt) x2=A2.sin (ωt+φ) – In the above equation the term φ is known an the phase difference. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 13
  • 14. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 14
  • 15. DEFINITIONS (Contd..) Resonance: – When the frequency of external excitation is equal to the natural frequency of a vibrating body, the amplitude of vibration becomes excessively large. – This concept is known as resonance. Mechanical systems: – The systems consisting of mass, stiffness and damping are known as mechanical systems. Continuous and Discrete Systems: – Most of the mechanical systems include elastic members which have infinite number of degree of freedom. – Such systems are called continuous systems. – Continuous systems are also known as distributed systems. – Cantilever, simply supported beam etc. are the examples of such systems. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 15
  • 16. DEGREE OF FREEDOM: • The minimum number of independent coordinates required to specify the motion of a system at any instant is known as degrees of freedom of the system. • In general, it is equal to the number of independent displacements that are possible. • This number varies from zero to infinity. • The one, two and three degrees of freedom systems are shown in figure 2. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 16 In single degree of freedom there is only one independent coordinate x1 to specify the configuration as shown in figure (a). Similarly, there are two (x1, x2). and three coordinates (x1, x2 and x3) for two and three degrees of freedom systems as shown in figure (b) and (c)
  • 17. PARTS OF A VIBRATING SYSTEM • A vibratory system basically consists of three elements, namely the mass, the spring and damper. • In a vibrating body, there is exchange of energy from one form to another. • Energy is stored by mass in the form of kinetic energy (1/2 mv2), in the spring in the form of potential energy (1/2 kx ) and dissipated in the damper in the form of heat energy which opposes the motion of the system. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 17 2 3 1 1. Inertia (stores kinetic energy) –Mass (m) 2. Elasticity (stores potential energy) – Spring (k) 3. Energy Dissipation- Damper (C)
  • 18. PARTS OF A VIBRATING SYSTEM • Energy enters the system with the application of external force known as excitation. • The excitation disturbs the mass from its mean position and the mass goes up and down from the mean position. • The kinetic energy is converted into potential energy and potential energy into kinetic energy. This sequence goes on repeating and the system continues to vibrate. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 18
  • 19. PARTS OF A VIBRATING SYSTEM (contd..) • At the same time damping force (cv) acts on the mass and opposes its motion. Thus some energy is dissipated in each cycle of vibration due to damping. • The free vibrations die out and the system remains at its static equilibrium position. • A basic vibratory system is shown in figure . 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 19
  • 20. F = cv Velocity Displacement Acceleration x v a k c m m F = kx F = ma Mechanical Parameters and Components
  • 21. TYPES OF VIBRATION Some of the important types of vibration are as follows 1) Free and Forced Vibration • After disturbing the system, the external excitation is removed. then the system vibrates on its own. This type of vibration is known as free vibration. – Simple pendulum is one of the examples. • The vibration which is under the influence of external force is called forced vibration. – Machine tools, electric bells etc. are the suitable examples. 2) Linear and Non-linear Vibration • In a system., if mass, spring and damper behave in a linear manner, the vibrations caused are known as linear in nature. – Linear vibrations are governed by linear differential equations. – They follow the law of superposition. • On the other hand, if any of the basic components of a vibratory system behaves non-linearly, the vibration is called non-linear. – Linear vibration becomes, non-linear for very large amplitude of vibration. – It does not follow the law of superposition. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 21
  • 22. TYPES OF VIBRATION (Contd..) 3) Damped and Un-damped Vibration • If the vibratory system has a damper, the motion of the system will be opposed by it and the energy of the system will be dissipated in friction. • This type of vibration is called damped vibration. • On the contrary, the system having no damper is known as un- damped vibration. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 22 n 2  d 2  Overdamped ( 1)   Underdamped ( 1)   Underdamped ( 0 )   Critically damped ( 1)  
  • 23. TYPES OF VIBRATION (Contd..) 4) Deterministic and Random Vibration • If in the vibratory system, the amount of external excitation is known in magnitude, it causes deterministic vibration. • Contrary to it, the non-deterministic vibrations are known as random vibrations. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 23
  • 24. TYPES OF VIBRATION (Contd..) 5) Longitudinal, Transverse and Torsional Vibrations • Figure represents a body of mass m carried on one end of a weightless spindle, the other end being fixed. If the mass m moves up and down parallel to the spindle axis, it is said to execute longitudinal vibrations as shown in figure (a). • When the particles of the body or shaft move approximately perpendicular to the axis of the shaft, as shown in figure (b), the vibration so caused are known as transverse. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 24 If the spindle gets alternately twisted and untwisted on account of vibratory motion of the suspended disc, it is called to be undergoing torsional vibrations as shown in figure (c).
  • 25. TYPES OF VIBRATION (Contd..) 6) Transient Vibration • In ideal systems the free vibrations continue indefinitely as there is no damping. • The amplitude of vibration decays continuously because of damping (in a real system) and vanishes ultimately. • Such vibration in a real system is called transient vibration. • Systems with finite number of degrees of freedom are called discrete or lumped systems. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 25
  • 26. SIMPLE HARMONIC MOTION: • The motion of a body to and fro about a fixed point is called simple harmonic motion. • The motion is periodic . • The motion of a simple pendulum is simple harmonic in nature. • A body having simple harmonic motion is represented by the equation 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 26
  • 27. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 27 SIMPLE HARMONIC MOTION:
  • 28. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 28 x Asin( ) A sin( t )     2 2 2 2 dx A cos( t ) dt and d x A sin( t ) x dt           SIMPLE HARMONIC MOTION:
  • 29. PHENOMENON OF BEATS • When two harmonic motions pass through some point in a medium simultaneously, the resultant displacement at that point is the vector sum of the displacement due to two component motions. • This superposition of motion is called interference. • The phenomenon of beat occurs as a result of interference between two waves of slightly different frequencies moving along the same straight line in the same direction. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 29 http://historicaltuning.co m/BeatsVideo.mp4
  • 30. PHENOMENON OF BEATS (contd…) • Consider that at particular time, the two wave motions are in the same phase. • At this stage the resultant amplitude of vibration will be maximum. • On the other hand, when the two motions are not in phase with each other, they produce minimum amplitude of vibration. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 30 Again after some time the two motions are in phase and produce maximum amplitude and then minimum amplitude. This process goes on repeating and the resultant amplitude continuously keeps on changing from maximum to minimum. This phenomenon is known as beat. https://www.youtube.com/ watch?v=5hxQDAmdNWE
  • 31. MATLAB Program for solving Harmonic analysis Problems clc clear all syms t w=20*pi; n=1:6; x1(t)=20*t; x2(t)=-20*t+2; x(t)=x1(t)+x2(t); a0=20*(int(x1(t),t,0,0.05)+int(x2(t),t,0.05,0.1)) an=20*(int((x1(t)*cos(w*n*t)),t,0,0.05)+(int((x2(t)*cos(w*n*t)),t, 0.05,0.10))) bn=20*(int((x1(t)*sin(w*n*t)),t,0,0.05)+(int((x2(t)*sin(w*n*t)),t, 0.05,0.10))) % a0/2 =1 % an =[ -4/pi^2, 0, -4/(9*pi^2), 0, -4/(25*pi^2), 0] %bn =[ 0, 0, 0, 0, 0, 0] 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 31
  • 32. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 32
  • 33. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 33
  • 34. %% % Problem number-2 clc clear all syms t w=10*pi; n=1:6; x1(t)=-20*t+2; % 0<t<0.2 a0=20*(int(x1(t),t,0,0.2)) an=10*(int((x1(t)*cos(w*n*t)),t,0,0.2)) bn=10*(int((x1(t)*sin(w*n*t)),t,0,0.2)) 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 34
  • 35. %% % Problem number-3 clc clear all syms t w=100*pi; n=1:6; x1(t)=abs(sin(100*pi*t)); a0=50*(int(x1(t),t,0,0.02)) an=100*(int((x1(t)*cos(w*n*t)),t,0,0.02)) bn=100*(int((x1(t)*sin(w*n*t)),t,0,0.02)) % This is the solution % a0 = 2/pi % an = [ 0, -4/(3*pi), 0, -4/(15*pi), 0, -4/(35*pi)] % an= -4/[(n^2-1)*pi] for even vlaues of n an=0 for odd values of n. % bn = [ 0, 0, 0, 0, 0, 0] 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 35
  • 36. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 36
  • 37. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 37
  • 38. 8/31/2021 Hareesha N G, Asst. Prof, DSCE, BLore-78 38